List of products by brand VETUS

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 65 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 75 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 90 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 100 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 110 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 125 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 150 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 40 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 45 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 50 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 60 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 65 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 75 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for straight exhaust hoses. Suitable for pipes with an internal diameter of Ø 90 mm.

Also available in a straight, 60º or 90º bend type.

Made of high-quality polyethylene, this large-capacity tank can handle all the liquids you need to store on your boat. It features an inspection hatch and can accommodate the ILT concept. For easy opening, there's a flange in the cap. At the bottom, there's a 38mm connection that can be drilled for interconnection or drainage.

Thanks to the large inspection hole (140 mm), the tank complies with ISO 2148. Depending on the type of use you have for this tank, a suitable connection kit is available. The tank is easy to install and has enough capacity for long cruises.

Features :

Width (mm): 390.

Capacity (liters): 100.

Length (mm): 1010.

Height (mm): 315.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 300.

B = Cut (mm): 280.

C (mm): 117.

D = Cutout (mm): 97.

E = Cutting radius (mm): R48.5.

Coverage area (cm²): 83.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 350.

B = Cut (mm): 330.

C (mm): 117.

D = Cutout (mm): 97.

E = Cutting radius (mm): R48.5.

Coverage area (cm²): 100.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 360.

B = Cutout (mm): 340.

C (mm): 130.

D = Cutout (mm): 110.

E = Cutting radius (mm): R55.

Coverage area (cm²): 122.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 450.

B = Cut (mm): 430.

C (mm): 130.

D = Cutout (mm): 110.

E = Cutting radius (mm): R55.

Coverage area (cm²): 159.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 490.

B = Cutout (mm): 470.

C (mm): 146.

D = Cutout (mm): 126.

E = Cutting radius (mm): R63.

Coverage area (cm²): 202.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 570.

B = Cut (mm): 550.

C (mm): 146.

D = Cutout (mm): 126.

E = Cutting radius (mm): R63.

Coverage area (cm²): 241.

Polished ventilation frame and grilles are made of natural anodized aluminum.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 590.

B = Cutout (mm): 570.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 283.