List of products by brand VETUS

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 127 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 152 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 203 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 254 mm.

Also available in a straight, 60º or 90º bend type.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 90 mm

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 100 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 125 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 150 mm.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 360.

Suitable for: Exhaust.

Max. pressure (bar): 2.0.

Weight (kg): 2.7.

Inner diameter (mm): 102.

Outer diameter (mm): 113.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Radius of curvature (mm): 62.

Suitable for: Exhaust.

Max. pressure (bar): 5.

Weight (kg): 0.60.

Inner diameter (mm): 25.

Outer diameter (mm): 35.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Radius of curvature (mm): 80.

Suitable for: Exhaust.

Max. pressure (bar): 4.5.

Weight (kg): 0.73.

Inner diameter (mm): 32.

Outer diameter (mm): 41.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Radius of curvature (mm): 95.

Suitable for: Exhaust.

Max. pressure (bar): 4.

Weight (kg): 0.85.

Inner diameter (mm): 38.

Outer diameter (mm): 47.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 150.

Suitable for: Exhaust.

Max. pressure (bar): 4.

Weight (kg): 1.31.

Inner diameter (mm): 51.

Outer diameter (mm): 61.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 190.

Suitable for: Exhaust.

Max. pressure (bar): 3.5.

Weight (kg): 1.60.

Inner diameter (mm): 63.

Outer diameter (mm): 74.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 225.

Suitable for: Exhaust.

Max. pressure (bar): 3.5.

Weight (kg): 2.06.

Inner diameter (mm): 76.

Outer diameter (mm): 87.

Length: 20m.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 2.3.

Inner diameter (mm): 102.

Outer diameter (mm): 110.

Radius of curvature (mm): 153.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by RINA (ISO 13363) and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 2.3.

Inner diameter (mm): 102.

Outer diameter (mm): 110.

Radius of curvature (mm): 153.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 2.8.

Inner diameter (mm): 110.

Outer diameter (mm): 119.

Bend radius (mm): 165.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by RINA (ISO 13363) and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 2.8.

Inner diameter (mm): 110.

Outer diameter (mm): 119.

Bend radius (mm): 165.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by RINA (ISO 13363) and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 3.3.

Inner diameter (mm): 127.

Outer diameter (mm): 137.

Radius of curvature (mm): 191.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by RINA (ISO 13363) and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 4.4.

Inner diameter (mm): 152.

Outer diameter (mm): 163.

Radius of curvature (mm): 228.

Suitable for: Exhaust.

Max. pressure (bar): 2.

Le tuyau d'évacuation des eaux usées le plus flexible disponible grâce à sa matière en caoutchouc EPDM lisse et en raison du grand nombre de spires.

La surface intérieure entièrement lisse du tuyau réduit la contre-pression dans le moteur.

Les tuyaux d'échappement d'un diamètre intérieur allant jusqu'à Ø 152 mm ont un rayon de courbure de 1,5 fois le diamètre. Les tuyaux d'échappement d'un diamètre intérieur supérieur à Ø 152 mm ont un rayon de courbure de deux fois le diamètre. Résistant à des températures comprises entre -30º + 100ºC avec des températures brèves de 115ºC.

Le type SLANG est approuvé par Lloyds Register et répond aux exigences de la norme SAE J2006 R2.

Caractéristiques :

Poids (kg) : 6,8.

Diamètre intérieur (mm) : 203.

Diamètre extérieur (mm) : 218.

Rayon de courbure (mm) : 406.

Convient pour : Échappement.

Pression max. (bar) : 2.