VOLVO BASE CYLINDER AXLE RING
Volvo Penta cylinder shaft bearing to be used in addition to bearings 3853423.
Explore our range of bushings for boat engines and drivelines. These rings and sleeves provide guidance, spacing and protection for shafts and rotating components in marine applications.
The bushing guides shaft rotation, absorbs part of the load and reduces wear between moving parts. Depending on the design, it can act as a guide bushing, spacer, thrust ring or protective sleeve against friction and corrosion.
On a powerboat, bushings are commonly used on the propeller shaft, in the gearcase, along the driveline and on various engine and control components.
Excessive play, visible wear, scoring marks or unusual noise are clear signs that it may be time to replace the bushing. A worn bushing can cause vibration, misalignment and premature wear of nearby parts.
Replacing bushings during driveline or shaft maintenance helps secure the mechanical assembly and reduce the risk of failure at sea.
As a specialist in mechanical parts for boat engines, DAM Marine offers bushings suitable for many marine applications: propeller shaft, gearcase, transmission and supports.
By choosing your boat bushings from DAM Marine, you benefit from a marine-focused catalogue and parts designed to withstand harsh saltwater conditions.
Volvo Penta cylinder shaft bearing to be used in addition to bearings 3853423.
Rubber ring for exhaust valve shaft in OMC or VOLVO horn.
Bague de direction pour embases Volvo Penta de types :
DPH-A
DPH-C
DPH-D
DPH-D1
DPH-E
DPI-A
DPR-A
DPR-B
DPR-C
DPR-D
TSK DPH-B
Steering ring for Volvo Penta base with diameter 42.8mm.
Steering ring for Volvo Penta base with 43mm diameter.
Coussinet pour axe de vérin Volvo Penta à utiliser en complément des coussinets 3853423.
Montages prévus pour embase Volvo Penta :
DP-S, SX
DP-S, DP-S1
DP-SM, DP-SMTD
SX-C
SX-M
SX-R
SX-S
Pensez à rajouter le coussinet en référence 3853423 !
Bagues de trim Mercruiser pour embases R, MR, Alpha One.
Kit of 2 white rings for Volvo Penta base.
- 21.5mm inside
- 32mm exterior
Application :
290
290A
290DP
SPA
SP-A1
SP-A2
DP-A
DP-A1
DP-A2
DP-B
DP-B1
Steering ring for Volvo Penta outdrive with the following dimensions:
Exterior: 43mm
Interior: 40.5mm
Height: 22mm