The RC6 series automatic anchor winch is made of stainless steel (AISI 316) and chrome-plated bronze suitable for use with 6mm/7mm chain spliced onto 12mm 8-plait cable.

The RC6 Series also features Maxwell's revolutionary patented Wave Designâ„¢ deck, a low-profile unit (no optional capstan drum). The vertical, in-line gearbox and motor allow for quick and easy installation. An inexpensive, high-performance, and aesthetically pleasing windlass, the RC6 is built to last and provide years of trouble-free use.

Offering most of the features of the RC8 series, the RC6 series was designed for the smaller trailer boat market.

Features :

Rope (in mm): 12.

Rope/Chain: Rope/Chain.

Drum: No.

Motor (in W): 500.

Weight (in kg): 8.5.

Maximum traction/lift (in kg): 350.

Short chain link (in mm): 6 - 7.

Vertical/Horizontal: Vertical.

Voltage (in V): 12.

The more powerful RC8-8 series can be used with 8mm chain spliced onto 14mm or 16mm 8-strand (braid) rope.

The ingenious Wave Designâ„¢ chain/rope system (chainwheel) is capable of accommodating a wide range of chain pitch differences within the specified chain size diameters. A sleek, low-profile version and a stainless steel (AISI 316) splined capstan drum version are available. The heavy-duty stainless steel (AISI 316) pressure arm is designed to effectively help grip the cable/chain splice, giving the RC8 series an unmatched level of performance. In combination with a heavy-duty, large-diameter stainless steel (AISI 316) pre-loaded spring, the pressure arm always exerts maximum control pressure. Works equally effectively with chain-driven bicycles. The huge through deck hawse chute ensures easy entry and exit of the cable/chain in and out of the anchor locker. The sealed oil bath and marine grade hard anodized alloy gearbox provide maximum efficiency with a screw and worm wheel.

Simple two-piece installation saves time and money and allows for easy retrofitting without windlass disassembly. Unique spacer tube design allows installation on virtually any deck thickness and multiple mounting positions. Self-aligning gearbox ensures optimal gearbox and motor location in virtually any installation situation. Complete topworks disassembly is possible using only the supplied handle and an Allen key. A "free fall" manual override, using the emergency clutch crank/handle, is also provided.

Features :

Rope (in mm): 14-16.

Rope/Chain: Rope / chain.

Drum: Yes.

Motor (in W): 1000.

Weight (in kg): 8.

Maximum traction/lift (in kg): 600.

Short chain link (in mm): 8.

Chain (in mm): 6-7.

Vertical/Horizontal: Vertical.

Voltage (in V): 12.

Stainless steel straight shackle for 14mm chain.

Anchor swivel shackles improve anchor retrieval. Using a swivel and connecting shackle for your anchor and mast will greatly improve anchor retrieval and help ensure the mast sits perfectly in your anchor locker.

Lever ratchet chain stop for 10mm chain specially designed for RC12 series windlasses.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

AA342 Dual Windlass Controller.

For use with windlasses, davits, thrusters, and other marine equipment. AA341 General Dual Equipment Controller.

Electrical protection against counter-electromotive force.

Made with a rubber overmold for impact protection and optimal grip. Storage cradle.

Works in parallel with any AutoAnchorâ„¢ product, rocker switches, foot switches, or other control equipment. Connectable to DC, AC, and hydraulic systems.

Heavy duty 4.5m coiled cable and connectors.

All products are IP67 rated, including cables, plugs and sockets.

Heavy-duty solenoids for the RC8-8 RC10 and RC12 series dual-direction windlasses are used in conjunction with the remote up/down panel, AutoAnchorâ„¢ rod counters, mobile handheld remotes and/or foot switches to switch the motor in the required direction.

They are suitable for our winch motors. Available in 24V DC for 2-terminal permanent magnet (PM), 3-terminal series-wound (SW) and 4-terminal field-wound (FW) motors.

Ignition-protected solenoids. Installation in a dry location is always recommended.

Anchor from the "MAXSET" range in galvanized steel conforming to the AISI 316 standard.

Based on the proven "plough" design, it is available in four different sizes for boats from approximately 4 m (15') to 18 meters (58').

Features :

Anchor weight (in kg): 4.

A (in m): 530.

B (in m): 222.

C (in m): 245.

D (in m): 8.