JOINT DE COUDE ECHAPPEMENT CRUSADER 1 TROU
Adapter joint for Chrysler elbow riser.
Stainless steel exhaust elbow for Volvo Penta 2000 series engine.
Elbow gasket 16902 included.
Yanmar exhaust elbow gasket.
Stainless steel exhaust elbow for Yanmar engine with water connection in the axis.
Application :
- 4JH2-UTBE
- 4JH2-DTBE
- 4JH2-DTE
- 4JH2-TBE
- 4JH2-TE
- 4JH2-UTE
- 4JH2L-HT
- 4JH3-TE
- 4JH-TE
Reassembly gasket 129472-13520 included.
Exhaust elbow for OMC 4 and 6 cylinder in-line engines up to 1993.
Exhaust elbow for OMC or Volvo Penta 4-cylinder 3-litre engine with OMC13858850 manifold ( HOLLEY 2-barrel).
This exhaust elbow is offset to align with the exhaust horn more significantly than on older generations.
Mounting kit included.
Exhaust elbow for Crusader engine based on GM SB and BB with the elbow in the middle of the manifold.
Height 160mm unraised.
For raised mounting, please refer to reference R029015.
Aluminum exhaust elbow for Marine Power brand engine.
Elbow joint to be added in reference 283147 and restriction 283111.
Fits 4.3L V6 to 8.2L V8 inclusive.
Stainless steel exhaust elbow for Yanmar LH series engine.
Reassembly gasket 119173-18811 included.
Center distance of 92 mm
Exhaust outlet diameter: 90 mm
water tap outlet diameter: 32 mm
Stainless steel exhaust elbow with 4 fixing screws for Yanmar 3 and 4JH engines.
80mm output.
Stainless steel exhaust elbow riser for Yanmar 6LY series engine.
Heat insulation protection reference MAT3 not included.
Pré-coude d'échappement entre la corne et le coude d'échappement pour moteur OMC V8 carburateur base Ford.
Caractéristiques :
- Diamètre corne : 95 mm
- Diamètre coude : 105 mm
- Longueur : 28 cm
Pré-coude d'échappement entre la corne et le coude d'échappement de moteur V6 4.3 litres et V8 base GM prés 1994.
Caractéristiques :
- Diamètre corne : 90 mm
- Diamètre coude : 100 mm
- Longueur : 35 cm
Joint de liaison entre le coude et le crossover de moteur PCM catalysée de types 5.7 litres.
Joint en métal.
Restriction for water passage on marine power exhaust elbow in 25mm diameter.