JOINT DE COUDE INDMAR FORD RAPTOR APRES 2017
Joint de coude pour moteur indmar base Ford Raptor après 2017.
Joint de coude pour moteur indmar base Ford Raptor après 2017.
Stainless steel exhaust elbow with 4 screw fixing for YANMAR engine with a 22mm diameter water connection hose.
For an elbow with a 17mm diameter water connection, there is a straight reducing fitting, reference 16828-1, which allows the diameter to be reduced from 22 to 17mm.
Coude d'échappement inox pour moteur YANMAR série 4LHA et 6LP.
joint de remontage inclus.
Ø échappement 102MM
Matériel pouvant remplacer les coudes pour application Volswagen marine.
Stainless steel exhaust elbow for Volvo Penta D2-75 engine including all mounting parts and water connection.
- Exhaust elbow 3584413
- Water connection 859836
- Joint 859835
- Joint 21194801
- Screws
Exhaust elbow gasket for Marine Power engine.
To restrict water flow, use reference 283111 in addition.
Stainless steel exhaust elbow for Yanmar 1 - 2 and 3 cylinder engines.
Link fitting 104214-13580 included with the elbow.
Water tap connection not included under reference 104407-44480 in diameter 17.5mm.
Material also available in CAST IRON under the reference YM123000.
The outlet is designed for a 53mm diameter hose but also has a thread to adapt the outlet according to your installation.
Stainless steel exhaust elbow for Volvo Penta D2 engine, including the necessary mounting hardware:
- Water connection 859836
- Water tap connection seal 859835
- Elbow joint 888596
- Screws
Coude d'échappement en INOX pour moteurs Yanmar de série QM suivants :
- 2QM15
- 2QM20
- 3QM30
- 3QM30H
Kit de qualité supérieur entièrement en INOX incluant les postes suivants :
- Coude d'échappement inox
- Bride de fixation en bout de collecteur inox
- Collier de serrage
- Raccord d'eau
Elbow gasket for Mercruiser 6.2 liter catalyzed engine with direct open seawater cooling.
Joint de coude d'échappement pour moteur base PCM et Crusader 6 litres.
Exhaust elbow gasket for Volvo Penta D2 engine.
Original Mercruiser exhaust elbow for old assembly V6 or V8 engines.
Stainless steel exhaust elbow kit for Volvo Penta D6 series engines.
The following hardware is included in the elbow kit:
- Water pipe VP21450768 and screws
- Plate VP3584006 and screws
- 2 O-rings 969415 for water pipe and plate
- VP25767 hose clamp
Elbow not having a collar at the exhaust outlet unlike reference VP8844.