PRE-ELBOW REDUCER STRAIGHT EXHAUST 75 - 65MM
Straight reducing pre-elbow allowing you to go from a diameter of 65 to 75mm.
Assembly including:
- Pre-elbow
- Necklaces
- Hose for diameter 75mm length 100mm.
Straight reducing pre-elbow allowing you to go from a diameter of 65 to 75mm.
Assembly including:
- Pre-elbow
- Necklaces
- Hose for diameter 75mm length 100mm.
Cast iron exhaust pre-elbow allowing the junction between the elbow exhaust hose and the horn exhaust hose on a Mercruiser V6 engine.
105mm round elbow side connection and oval horn side connection.
For installation with AP1520 and AP1525 hoses on engines without risers.
Can be mounted on a V8 engine block.
Coude catalysé bâbord pour moteur PCM disposant d'un bouchon de purge bleu.
Elbow gasket for Indmar big block GM454 engine.
Yanmar exhaust elbow gasket.
Gasket for PERKINS 4108 - 4154 engine exhaust elbow.
Center distance 76x63mm.
Exhaust elbow riser sold individually for Crusader V8 engine, height 200mm.
Reassembly gasket included.
Optional thermal insulation for Volvo Penta exhaust elbow riser part number VP9021.
Exhaust elbow for Yanmar 3JH2E engine.
Water tap diameter: 25.4mm
Exhaust diameter: 50mm
Center distance of fixing screws: 58 x 58
Gasket 129472-18090 included.
Stainless steel exhaust elbow kit for Volvo Penta D6 engine with a probe on the elbow.
Elbow with a collar at the exhaust outlet unlike reference VP22671214.
The following hardware is included in the elbow kit:
- 2 water pipes VP21450768 as well as the screws
- 2 O-rings 969415 for water pipes
Remember to also add the installation collar: VP25767
Exhaust elbow for OMC engine based on Ford or GM with elbow at the end of the manifold.
Exhaust elbow for OMC 2.3 liter 4-cylinder engine based on Ford.
Exhaust elbow for Mercruiser engine.
Mounting hardware included.
Connection kit for water tapping on Chriscraft elbows.