

COLLECTEUR ECHAPPEMENT MERCRUISER V6 OEMMERCRUISER
Ref. 99746A17Collecteur d'échappement origine pour moteur Mercruiser V6 ancien montage.
Retrouvez facilement votre pièce détachée de bateau
In order to choose the exhaust manifold compatible with your engine, you can use the filters available to the left of your screen.By indicating the brand and model of your engine, you will be able to display only the exhaust collectors compatible with your engine.If you have any questions, do not hesitate to contact us.
You will find in this section your exhaust collectors as well as the exhaust seals necessary to lay them down.
It is a vital element of your engine (as well as your exhaust elbows);the gases and water circulating by this same room, if one of the two and failing you put your engine block in danger.
Collecteur d'échappement origine pour moteur Mercruiser V6 ancien montage.
Collecteur d'échappement origine pour moteur Mercruiser V8 ancien montages.
Manifold gasket for Ford Raptor indmar engines.
Sold individually.
WTO collection plate base FORD.
Mercruiser exhaust collector for engine types 8.1L GM496 and 8.2L GM502 new generation.
Collector joint and visserie included.
Original Exhaust Drive Mercruiser OEM for V8 engine with Dry type outdoor water passages.
Not included.
Exhaust collector Mercruiser - OEM for Mercruiser V6 engine with external water passages of Dry types.
Not included.
Starboard exhaust collector - right for Mercruiser V6 engine:
- 4.3L MPI
- 4.5L MPI
Elbow joint to be defined:
27-8M2004606
27-8M2004414
Harvester joint: FP17410
Escape collector babord - left for Mercruiser V6 engine:
- 4.3L MPI
- 4.5L MPI
Elbow joint to be defined:
27-8M2004606
27-8M2004414
Harvester joint: FP17410
Anode joint for Volvo Penta catalysed collector hatch.
INOX exhaust collector for Yanmar series 8 engine:
- YS8
- YSB8
- YSC8
- YSE8
- YSM8
Rolling joint included.
Starboard exhaust collector for H5 - H6 type PCM engine with temperature sensor measuring liquid temperature and not matter.
Mounting with a probe on the COTE and not on the top of the collector.
Starboard exhaust collector for H5 - H6 type PCM engine with temperature sensor measuring the metal temperature on the collector's DESSUS.
Exhaust collector babord for PCM engine of types H5 - H6 with temperature sensor measuring the temperature of the liquid and not the material.
Mounting with a probe on the COTE and not on the top of the collector.
Exhaust collector babord for PCM engine of types H5 - H6 with temperature sensor measuring the metal temperature on the collector's DESSUS.
You will find in this section your exhaust collectors as well as the exhaust seals necessary to lay them down.
\nIt is a vital element of your engine (as well as your exhaust elbows);the gases and water circulating by this same room, if one of the two and failing you put your engine block in danger.
\nA sealing problem, even infime, will cause the sea water to fall by gravity in the cylinders of your engine block damageing it irreversibly.You will then need to replace the complete engine block.
\nWe recommend changing these peripheries every 5 years;however, this recommendation is an average, intensive use of seawater can deteriorate the substance more quickly;conversely some may have a larger life.If you are brought to change your collector we strongly recommend that you change the elbow and collector pair (the port and starboard), wear being homogeneous.
\nA careful examination of these parts (layer and collector) is highly recommended before the season.
\nOur exhaust collectors come from Barr Marine, manufacturer for all marine motorists such as Volvo Penta, Mercruiser - Mercury, Crusader, PCM (Pleasure Craft Marine), Indmar, Illmor...The other brands we provide because Barr no longer produces them are of equivalent quality to minima.