OMC EXHAUST ELBOW OUTLET
Pré-coude d'échappement faisant office de réducteur pour moteur mercruiser 4 cylindres.
Caractéristiques :
- Diamètre coude : 102 mm
- Diamètre corne : 80 mm
- Longueur : 23 cm
Port catalyzed elbow for PCM engine with an anode and not a blue bleed plug.
Starboard catalyzed elbow for PCM engine with an anode and not a blue bleed plug.
Starboard catalyzed elbow for PCM engine with an anode and not a blue bleed plug.
Port catalyzed elbow for PCM engine with an anode and not a blue bleed plug.
Joint de de plaque inclus dans le kit FP17500.
Joint de coude d'échappement pour moteur PCM.
Gasket kit for Mercruiser engine including:
4 pcs inspection hatch seals AP0314
4 pcs elbow gaskets 27-48042
Exhaust elbow riser sold individually for Crusader V8 engine, height 100mm.
Reassembly gasket included.
Exhaust hose for catalyst outlet on PCM H5 - H6 series engine.
Inner diameter 115mm.
Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.
Durite disposant d'une surface lisse pour un meilleur serrage des colliers.
Vendu au mètre linéaire.
Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.
Hose with a smooth surface for better tightening of the clamps.
Sold by the linear meter.
Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Exhaust and cooling hose adapter allowing the connection of hoses with different diameters.
Durite d'échappement pour moteur Yanmar 4LHA - 6LPA reliant le coude d'échappement à la corne d'embase.
6LPA - DTZE
6LPA - DTZEP1
6LPA-STZE
6LPA-STZEP1
4LHA
passe coque universel de diamètre intérieur 76mm et extérieur 90mm.
Clapet d'échappement universel de diamètre 75mm.
Anti-siphon elbow without valve and with hose. Supplied with ventilation pipe, connection 13 - 32 mm.
Can be used as a drainage system or toilet.
Interchangeable with the AIRVENT type and have the same fixing center distances.
Comes complete with fitting, hose clamps and 2m of hose. Non-valve anti-siphon elbows must be fitted with a ventilation pipe.
The air vent fitting rotates 360°. (Includes a 2 m hose and skin fittings). In addition, the valve can be serviced without removing the vent from the wall and no tools are required for this. For replacement, a set of 5 valves is available as a spare part.
A 13 mm diameter flexible hose can be directly connected to the elbow connections
Can be connected to pipes with inner diameters of 13, 19, 25 and 32 mm.
Size :
Width (mm): 68.
Length (mm): 96.
Height (mm): 133.