VOLVO ELBOW JOINT - 856028
Elbow gasket for Volvo Penta engines of types:
AQD19
AQD21A, AQD21B
MD21A, MD21B
AQD27
AQD29, AQD29A
MD29, MD29A
AQD32A
MD32A
Materials included in the gasket kit:
22130
22129
Complete screw kit for 2 Mercruiser risers 150mm high including reassembly seals.
Extension sold individually for Crusader engine with elbow in the middle of the manifold type 98126.
Exhaust and cooling hose adapter allowing the connection of hoses with different diameters.
Exhaust hose for Indmar Raptor engine.
Tuyau d'échappement humide Trident série 200 non armé disposant d'une double enveloppe pour une meilleure longévité.
Durite plus souple et fine que la durite Trident flex pour les montages nécessitant une tolérance plus importante tel que sur les échappements libre.
Durite disposant d'une surface lisse pour un meilleur serrage des colliers.
Vendu au mètre linéaire.
Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Exhaust hose for VOLVO diesel engine with the following dimensions:
Diameter: 95mm
Height: 100mm
Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.
Hose with a smooth surface for better tightening of the clamps.
Sold by the linear meter.
Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
90° angled exhaust sleeve with internal diameter 100mm, length 21cm.
Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.
Durite disposant d'une surface lisse pour un meilleur serrage des colliers.
Vendu au mètre linéaire.
Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Complete exhaust flap kit including all parts for Corsa brand assemblies.
Anti-siphon device with pressure relief valve without ventilation line. Supplied with connector, hose clamps and 4 m of 8 x 14 mm hose.
Can be used as an exhaust system or toilet.
Can be connected to pipes with internal diameters of 13, 19, 25 and 32 mm.
A 13mm diameter pipe can be directly fitted to the elbow fittings.
Size :
Width (mm): 50.
Length (mm): 98.
Height (mm): 162.
Materials:
Elbow, seat, valve and edge outlet: synthetic material.
Spring: Stainless steel.
Valveless anti-siphon device with ventilation line. Supplied with connector, hose clamps and 4 m of 8 x 14 mm hose.
Can be used as an exhaust system or toilet.
Can be connected to pipes with internal diameters of 13, 19, 25 and 32 mm.
A 13mm diameter pipe can be directly fitted to the elbow fittings.
Size :
Width (mm): 50.
Length (mm): 98.
Height (mm): 162.
Materials:
Elbow, seat, valve and edge outlet: synthetic material.
Spring: Stainless steel.
Waterlock d'une capacité de 7 litres en polyéthylène haute densité disposant d'entrées et sorties fixes à diamètres multiples à savoir :
- 40.5mm
- 45.5mm
- 50.5mm
Dimensions : 48x14x26cm
Silencer - Volvo type Waterlock with a capacity of 4 liters and two 40mm straight outlets.
Dimensions:
Total length: 310mm
Body length: 200mm
Height of the attachment to the water tap: 155mm
Water connection diameter: 40mm
Silencieux - Waterlock type volvo du capacité de 4 litres disposant de une entré droite et une sortie à 45° vers le haut de diamètre 45mm.
Dimensions :
Longueur totale : 310mm
Longueur du corps : 200mm
Hauteur de la fixation au piquage eau : 155mm
Diamètre piquage eau entrée droit : 45mm
Diamètre piquage eau sortie 45° : 45mm
Une fois que le moteur de votre bateau a été arrêté, avec la bonne capacité de volume choisie, le waterlock VETUS s'assurera que l'eau ne retournera pas dans le moteur. Tous les pots à eau VETUS sont munis d'un bouchon de vidange pour l'hivernage.
Convient aux tuyaux d'échappement d'un diamètre intérieur de Ø 45 mm.
Capacité : 4.3L
A : 372 x 110 mm
B : 211mm
D: 45mm
1 entrée orientable
1 sortie fixe
Système d'échappement waterlock VETUS de grande longueur pour durite échappement standard.
• Convient aux tuyaux d'échappement d'un diamètre intérieur de Ø 45 mm
• Embouts d'entrée et de sortie rotatifs
• Livré avec 1 sangle de sécurité
Capacité : 5.7L
A : 430 x 152 mm
B : 310mm
D: 45mm
Exhaust manifold gasket for Volvo Penta engine series:
D3-110i-D, D3-110i-E, D3-110i-F, D3-110i-G
D3-140A-D, D3-140A-E, D3-140A-F, D3-140A-G
D3-140i-E, D3-140i-F, D3-140i-G
D3-150i-D, D3-150i-E, D3-150i-F, D3-150i-G
D3-170A-D, D3-170A-E, D3-170A-F, D3-170A-G
D3-170i-D, D3-170i-E, D3-170i-F, D3-170i-G
D3-200A-D, D3-200A-E, D3-200A-F, D3-200A-G
D3-200i-D, D3-200i-E, D3-200i-F, D3-200i-G
D3-220A-D, D3-220A-E, D3-220A-F, D3-220A-G
D3-220i-D, D3-220i-E, D3-220i-F, D3-220i-G
Exhaust manifold gasket kit for Ford BB type 460 engine.
Kit joints de collecteur d'échappement pour moteur V6 4.3 litres.