EXCHANGER COVER GASKET 125MM - 5"
Gasket for heat exchanger cover on Mercruiser diesel engine CMD series.
Diameter 126mm.
Indmar Marine Engines est une marque présente depuis plus de 45 ans dans l'industrie de la marine intérieure. Leurs moteurs inboards font partie des tous meilleurs du marché.
N'hésitez pas à regarder les pièces proposées par DAM Marine.
Gasket for heat exchanger cover on Mercruiser diesel engine CMD series.
Diameter 126mm.
Raccord de refroidissement à 90° de dimension 1/2 x 1 pouce.
Pour durite diamètre 25mm.
Filetage : 1/2
Durite : 25mm
Engine mount with the following characteristics:
Center distance 100mm with
19mm threaded rod.
Support height 47mm
height of threaded rod included 70mm.
For a 16mm threaded rod see reference BA8/0001.
Oil dipstick tube for GM base 4.3 liter V6 engine.
Material to be used with reference 551660.
Joint de coude pour moteur indmar base Ford Raptor après 2017.
Upper and lower thermostat housing for Indmar engine.
Thermostat and cover gasket included.
Hardware replacing old 531402 housings.
Starter motor for Ford Raptor engine after 2019 in upper part mounting with machining on the front face.
Original Indmar starter.
Injector for Indmar 5.7 liter engine.
Indmar 50-30 amp 5-terminal relay.
These starter relays are found on Indmar PCM engines with an ECM E-Controls box.
Collier d'échappement pour moteur indmar disposant d'un montage avec échappement catalysé.
O2 Oxygen Sensor - 4 pins for Indmar catalyzed engines with ETXCAT cooling system.
Fitment for all GM based Indmar engines.
Applications:
ILMOR MARINE MASTERCRAFT:
- MV8-5.7L
- MV8-6.0L
- MV8-6.2L
- MV8-7.4L
- MCX
- RTP1
- LY6
- L18
INDMAR MARINE:
- 5.7L SERIES
- 6.0L SERIES
- 6.2L SERIES
- 8.1L SERIES
MALIBU MARINE:
- Monsoon 330 SS
- Monsoon 350 SS
- Monsoon 409 SS
- Monsoon 427 SS
- Monsoon 572 SS
- 320 LCR
- Monsoon 340
- Hammerhead 383
- Vortec 8100L
Reducer fitting kit allowing the replacement of old fittings removed from the factory.
The allen fitting must be removed on the manifold for installation of this kit.
Exhaust manifold for INDMAR engine type Ford Raptor 6.2 liters.
Assembly for odd cylinder: 1-3-5-7 / BANK 1
Remember the reassembly gaskets are not included.
Exhaust manifold for INDMAR engine type Ford Raptor 6.2 liters.
Mounting for pair cylinders: 2-4-6-8 / BANK 2
Remember the reassembly gaskets are not included.
54mm thermostat for Indmar Raptor base Ford 6.2L 160°F engine.
Indmar specific oil fitting for Jiffy assembly requiring a fitting with an O-ring.