CATALYTIC OXYGEN PROBE
Oxygen sensor with 6 parallel pins.

Depuis plus de 45 ans, PCM est un des grands acteurs du marché en concevant et fabriquant des moteurs spécifiquement pour les sports nautiques intérieurs. Il fournit des moteurs de haute qualité et fournissant de grosses performances.
Venez découvrir les produits PleasureCraft Marine disponibles sur DAM Marine.
Oxygen sensor with 6 parallel pins.
Exhaust clamp on PCM H5 - H6 series engine.
Oil dipstick tube for PCM engine with direct inverter output.
Anode crayon aluminium 3/4 disposant d'un trou de purge sur le bouchon.
Anode pour inverseur V-DRIVE 2020 et après.
Oil cooler with the following characteristics:
- Body length: 300mm
- Hoses diameter: 25mm
- Connection: 3/8
New generation coupling for PCM engine based on Ford 302 and Ford 351 with Velvet Drive - Borg Warner brand inverter with 26 splines.
Features :
- 26 grooves
- External diameter: 330mm
- Inner diameter: 34mm
- Height: 32mm
More robust coupling replacing the old PCM assemblies on Ford bases.
Temperature probe for single-station VDO instrumentation.
120°C temperature sensors with ground return.
Dimensions: 1/2-14 NPT
Mounting for boat such as Montecarlo Offshorer with VDO pressure gauge.
Plug for Carter type electric fuel pump.
90° elbow cooling connector male - male for Crusader manifolds types: 97993 - 97992 - 97753 - 97752
Thread: 1'
Hose: 32mm 1-1/4"
For assembly with purge see reference 30624.
Starboard exhaust manifold for PCM 5.7 liter engine with catalytic converter.
Front face outlet oil seal for PCM brand V-Drive Power Plus in 1.48/1 ratio.
PCM brand engine coupling with the following characteristics:
- 6 springs
- 26 grooves
- External diameter 33.5 cm
- Inner diameter 34 mm
Neutral safety probe for Velvet Drive - Borg Warner brand inverter from 1981 and later as well as PCM inverters.
IRM80-type PCM reversor with a ratio of 1.23/1 and an electrical inversion control.
Exhaust elbow gasket for PCM engine.
Cylinder head gasket for 6 liter engine after 2008.
Cylinder head gasket with 6 and 6.2 litre markings on top and no small cooling hole on the bottom left.
Electronic ignition module for Mallory brand igniter.
Module to replace the existing one which cannot convert a conventional igniter.
Use on AP1677EST - RA107039M type igniters.
Solenoid valve harness for reversing PCM IRM80 inverters of type RA157027E.
Gasket for air intake box 4 screws.