Bevel gear set for sterndrive

Catégories

Bevel gear set for sterndrive

Discover our bevel gear sets for sterndrives. The bevel gear (ring and pinion) changes the direction of drive and provides the correct reduction ratio between engine and propeller.

The role of the bevel gear in a drive unit

The bevel gear set transfers torque from the input shaft to the propeller shaft at 90 degrees. Proper gear mesh is essential to limit noise, heat and wear under high load.

A good quality gear set helps deliver engine power efficiently and extends the life of the sterndrive.

When to replace bevel gears

Chipped or pitted teeth, corrosion, metal particles in the oil, whining noises or rough operation are clear signs that the bevel gears should be inspected and replaced if damaged.

Fitting a new gear set, with correct backlash and preload adjustment, helps secure the drive and reduce noise levels.

Bevel gear sets selected by DAM Marine

As a specialist in marine drive components, DAM Marine supplies bevel gear sets for many VOLVO, MERCURY, MERCRUISER and OMC sterndrives.

By choosing your sterndrive bevel gear set from DAM Marine, you benefit from marine-grade gears designed for high torque and saltwater use.

Un doute? > contact us

16 item(s)

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.47 AFTER 1998

RÉF. 11214 | MERCRUISER

20-22 tooth 1.47 ratio bevel gear kit for Mercruiser Alpha One generation 2 drives after 1998.

Installation intended for V8 petrol engines.

Kit including bearing 21560.

Livraison express → Thursday 04 June

Livraison classique → Monday 08 June

Commandez dans les

00 h 00 m 00 s

Disponible

€747.48 VAT included

€622.90 VAT excluded

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.62 - 2.0 AFTER 1998

RÉF. 11222 | MERCRUISER

24-24 tooth bevel gear kit with a ratio of 1.62 - 2.0 for Mercruiser Alpha One generation 2 drives after 1998.

Installation intended for V6 petrol engine.

Livraison express → Thursday 04 June

Livraison classique → Monday 08 June

Commandez dans les

00 h 00 m 00 s

Disponible

€596.54 VAT included

€497.12 VAT excluded

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.81 AFTER 1998

RÉF. 11233 | MERCRUISER

17-19 tooth 1.81 ratio bevel gear kit for Mercruiser Alpha One generation 2 drives after 1998.

Installation intended for V6 petrol engines.

Livraison express → Thursday 04 June

Livraison classique → Monday 08 June

Commandez dans les

00 h 00 m 00 s

Disponible

€692.40 VAT included

€577.00 VAT excluded

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.94 - 2.4 AFTER 1998

RÉF. 11244 | GLM

20-24 tooth bevel gear kit with a ratio of 2.4 - 1.94 for Mercruiser Alpha One generation 2 drives after 1998.

Installation intended for 4-cylinder petrol engines.

Livraison express → Thursday 04 June

Livraison classique → Monday 08 June

Commandez dans les

00 h 00 m 00 s

Disponible

€582.00 VAT included

€485.00 VAT excluded

OMC COBRA BASE BEVEL TORQUE 21/21 TEETH 0984580

RÉF. AP8770 | EMP

OMC Cobra base bevel gear kit with a 21:21 ratio for the following engines:

Installation for all 4-cylinder engines.

Livraison express → Thursday 04 June

Livraison classique → Monday 08 June

Commandez dans les

00 h 00 m 00 s

Disponible

€894.00 VAT included

€745.00 VAT excluded

BEVEL GEAR MERCRUISER ALPHA ONE RATIO 1.50 - 1.47 BEFORE 1998

RÉF. 11210/1.47 | EMP

20-22 tooth bevel gear kit with a ratio of 1.50 - 1.47 for Mercruiser Alpha One drives from 1970 to 1997.

Installation intended for V8 petrol engines.

Kit including bearing 21560.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€532.80 VAT included

€444.00 VAT excluded

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE RATIO 1.65 BEFORE 1998

RÉF. 11210/1.65 | EMP

24-24 tooth bevel gear kit with a ratio of 1.65 - 1.62 for Mercruiser Alpha One drives from 1970 to 1997.

Installation intended for 6-cylinder in-line gasoline engines.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€426.00 VAT included

€355.00 VAT excluded

BEVEL GEAR MERCRUISER ALPHA ONE RATIO 1.84 - 1.81 BEFORE 1998

RÉF. 11210/1.84 | EMP

17-19 tooth bevel gear kit with a ratio of 1.84 - 1.81 for Mercruiser Alpha One drives from 1970 to 1997.

Installation intended for V6 and 4-cylinder 3.7L 470 petrol engines.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€330.00 VAT included

€275.00 VAT excluded

BEVEL GEAR MERCRUISER ALPHA ONE RATIO 1.98 - 1.94 BEFORE 1998

RÉF. 11210/1.98 | EMP

20-24 tooth bevel gear kit with a ratio of 1.98 - 1.94 for Mercruiser Alpha One drives from 1970 to 1997.

Installation intended for 4-cylinder petrol engines.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€390.00 VAT included

€325.00 VAT excluded

OMC 800 21/16 TEETH BEVEL GEAR BASE

RÉF. 22510 | EMP

Bevel gear kit for OMC 800 base with a 21:16 ratio for the following engines:

- 5.7L GM350

- 5.8L FORD 351

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€1,920.00 VAT included

€1,600.00 VAT excluded

OMC 800 21/17 TEETH BEVEL GEAR BASE

RÉF. 22512 | GLM

Conical torque kit for WTO 800 base with a ratio 21:17 for the following engines:

- 5L GM305

- 5L FORD 302

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€1,182.00 VAT included

€985.00 VAT excluded

OMC 400-800 21/19 TEETH BEVEL TORQUE

RÉF. 22514 | GLM

Conical torque kit for WTO 800 base with a ratio 21:19 for the following engines:

- 4.3L V6 GM262

- 4L 6 cylinder online GM250

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€942.00 VAT included

€785.00 VAT excluded

OMC 400 21/18 TEETH BEVEL GEAR BASE

RÉF. 22518 | GLM

Conical torque kit for WTO 400 base with a ratio 21:18 for the following engines:

Mounting for all 4-cylinder engines.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€1,260.00 VAT included

€1,050.00 VAT excluded

OMC COBRA V8 BEVEL GEAR BASE 21/16 TEETH 0983825

RÉF. 22520 | EMP

Bevel gear kit for OMC Cobra base with a 21:16 ratio for the following engines:

- 5.7L GM350

- 5.8L FORD 351

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€1,078.80 VAT included

€899.00 VAT excluded

CONICAL TORQUE OMC COBRA V6 BASE 21/19 TEETH 0984012

RÉF. 22540 | EMP

Bevel gear kit for OMC Cobra base with a 21:19 ratio for the following engines:

- 4.3L V6 GM262

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€954.00 VAT included

€795.00 VAT excluded

OMC COBRA V8 BEVEL GEAR BASE 21/18 TEETH 0983826

RÉF. AP8703 | EMP

Bevel gear kit for OMC Cobra base with a 21:18 ratio for the following engines:

- All 4-cylinder engines

- 5L V8 FORD

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€954.00 VAT included

€795.00 VAT excluded

16 item(s)

Vous ne trouvez pas votre pièce moteur bateau ?

(c’est bateau)

Devis gratuit

Oil circuit

Upper Engine

Lower Engine

Exhaust

Electrical parts

Power steering and Steering

Bevel gear set for sterndrive

The role of the bevel gear in a drive unit

When to replace bevel gears

Bevel gear sets selected by DAM Marine

16 item(s)

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.47 AFTER 1998

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.62 - 2.0 AFTER 1998

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.81 AFTER 1998

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE G2 RATIO 1.94 - 2.4 AFTER 1998

OMC COBRA BASE BEVEL TORQUE 21/21 TEETH 0984580

BEVEL GEAR MERCRUISER ALPHA ONE RATIO 1.50 - 1.47 BEFORE 1998

BEVEL GEAR TORQUE MERCRUISER ALPHA ONE RATIO 1.65 BEFORE 1998

BEVEL GEAR MERCRUISER ALPHA ONE RATIO 1.84 - 1.81 BEFORE 1998

BEVEL GEAR MERCRUISER ALPHA ONE RATIO 1.98 - 1.94 BEFORE 1998

OMC 800 21/16 TEETH BEVEL GEAR BASE

OMC 800 21/17 TEETH BEVEL GEAR BASE

OMC 400-800 21/19 TEETH BEVEL TORQUE

OMC 400 21/18 TEETH BEVEL GEAR BASE

OMC COBRA V8 BEVEL GEAR BASE 21/16 TEETH 0983825

CONICAL TORQUE OMC COBRA V6 BASE 21/19 TEETH 0984012

OMC COBRA V8 BEVEL GEAR BASE 21/18 TEETH 0983826