Ultra-thin portholes - Type PM (AI)

The PL series portholes are so flush that they resemble fritted glass and are suitable for installation in

a variety of materials.

Despite their low thickness, they are still CE approved for the AI location area, which means they can be used for all areas listed in the ISO standard! A very flat aluminum edge combined with the clamping mechanism ensures a very low-profile porthole even when mounted in the glass itself. They are also equipped with the new ergonomic buttons.

These ultra-thin portholes can accept panel thicknesses ranging from 2 to 20 mm. The inside of the clamping profile can be finished with the supplied trim. All

PL portholes are made of fashionable satin black aluminum with 10mm thick "black smoke" tinted acrylic for a premium look.

Features :

External dimensions A x B (in mm): 294 x 172.

Cut-out dimensions C x D (in mm): 270 x 148.

Cutting radius R (in mm): 74.

Replacement mosquito net: HOR12.

Medium-strength portholes - Type PX and PXF (AIII)

These portholes are suitable for use on the roof side.

They come with a 10mm smoked unframed opening glass pane.

The clamp-type installation ensures that no fasteners are visible from the inside or outside.

The portholes can be kept open in any position thanks to the friction hinges.

In the closed position, two buttons ensure watertightness. They come standard with a mosquito net.

The porthole can be installed on a surface with a minimum thickness of 2 mm and a maximum thickness of 18 mm.

Features :

External dimensions A x B (in mm): 441 X 179.

Cut-out dimensions C x D (in mm): 417 X 155.

Replacement mosquito net: HOR45.

Ultra-thin portholes - Type PZ (AI)

The PL series portholes are so flush that they resemble fritted glass and are suitable for installation in

a variety of materials.

Despite their low thickness, they are still CE approved for the AI location area, which means they can be used for all areas listed in the ISO standard! A very flat aluminum edge combined with the clamping mechanism ensures a very low-profile porthole even when mounted in the glass itself. They are also equipped with the new ergonomic buttons.

These ultra-thin portholes can accept panel thicknesses ranging from 2 to 20 mm. The inside of the clamping profile can be finished with the supplied trim. All

PL portholes are made of fashionable satin black aluminum with 10mm thick "black smoke" tinted acrylic for a premium look.

Features :

External dimensions A x B (in mm): 622 x 197.

Cut-out dimensions C x D (in mm): 598 x 173.

Cutting radius R (in mm): 61.

Replacement mosquito net: HOR63.

Adaptable mounting for PL, PM, PZ, PW and PX portholes.

The new VP000044 knobs are interchangeable with the original PPL knobs.

Replacement mosquito net for porthole type PL751.

Ultra-thin portholes - Type PM (AI)

The PL series portholes are so flush that they resemble fritted glass and are suitable for installation in

a variety of materials.

Despite their low thickness, they are still CE approved for the AI location area, which means they can be used for all areas listed in the ISO standard! A very flat aluminum edge combined with the clamping mechanism ensures a very low-profile porthole even when mounted in the glass itself. They are also equipped with the new ergonomic buttons.

These ultra-thin portholes can accept panel thicknesses ranging from 2 to 20 mm. The inside of the clamping profile can be finished with the supplied trim. All

PL portholes are made of fashionable satin black aluminum with 10mm thick "black smoke" tinted acrylic for a premium look.

Features :

External dimensions A x B (in mm): 244 x 146.

Cut-out dimensions C x D (in mm): 220 x 122.

Cutting radius R (in mm): 61.

Replacement mosquito net: HOR11.

Replacement mosquito net for PXF type porthole with a depth of 219mm.