BOBINE ALLUMAGE MERCURY 8-9.9HP
Bobine d'allumage pour Mercury et Tohatsu suivants :
- Mercury : 8 et 9.9HP 4 temps après 2003
- Tohatsu : 8 et 9.9HP 4 temps après 2003
Bobine d'allumage pour Mercury et Tohatsu suivants :
- Mercury : 8 et 9.9HP 4 temps après 2003
- Tohatsu : 8 et 9.9HP 4 temps après 2003
Ignition coil for the following Yamaha and Mercury outboard motors:
Mercury: 2 to 3.3HP 2-stroke
Yamaha: 9.9 to 15HP from 1996 to 2009
Bobine d'allumage pour moteur Mercury Optimax à partir de 2006 suivants :
135, 150, 175 2.5L DFI OPTIMAX
200, 225, 250 3.0L DFI OPTIMAX
Complete spark plug wire set with 90° ends for Johnson - Evinrude V6 engines from 150 to 235HP.
Set of 6 pieces.
Spark plug wires for BRP E-TEC 40 to 90HP engines from 2005 to 2007.
Sold individually.
Universal resistor 1.5 ohms.
Left cylinder head ignition coil for Indmar Raptor type engines before 2018 with serial number 207510 and lower.
Cylinder numbers: 5 - 6 - 7 - 8
Please note: please compare with reference 597031 because the assembly is different depending on the cylinder head.
Ignition coil for 8.1 liter GM496 engine before 2005.
Spark plug wire kit for FORD 2.3 litre 4 cylinder base engine.
Fils de bougie à l'unité pour moteur Indmar 6.2L Ford RAPTOR.
Complete spark plug wire kit for PCM 6 liter ZR6 type engines from 2003 to 2007 (LQ4).
- Wire kit initially installed on Crusader engines under reference RK120021A
- 7mm diameter wires for Crusader 6.0L MPI.
Assembly not compatible with engines after 2008 such as the ZR409.
- If your engine is after 2008, for example ZR409, refer to reference RK120022.
- If your engine is catalyzed, refer to reference RK120021B
Equipment that can be installed on 6 litre Indmar brand engines.
Spark plug wires for BRP E-TEC 200 to 250HP engine from 2005 to 2007.
Sold individually.
Fils de bougie à l'unité pour moteur Mercury V6 135 à 300HP.
Les embouts des fils disposant de coudes à 90° femelles.
Matériel existant également sous forme de kit pour les moteurs V6 sous références AP0009.
3-wire female connection harness for finalizing the installation of a Mallory ignition module or electronic igniter.
Ignition Module for Mallory Distributor - MSD
Vis de fixation pour tête de delco thunderbolt.
4 pcs nécessaires.
4-wire forward-reverse cut-off switch for OMC base of the following engines:
- 4 cylinders 2.3 and 3 liters 120-140HP
- 4.3 liter V6
Forward - reverse cut-off switch for OMC 5 and 5.7 litre engines.
Ignition switch for Volvo Penta B18 or B20 engine.
Rupteur d'allumage pour moteurs Volvo Penta B30 de types :
AQ165A, AQ170A, AQ170B, AQ170C
BB165A, BB170A, BB170B, BB170C
Montage pour tête d'allumeur de diamètre 90mm.