CONVENTIONAL 4-CYLINDER IGNITION ROTOR

V8 distributor head for thunderbolt distributor with 4 fixing screws and a round coil.
Left cylinder head ignition coil for Indmar Raptor type engines after 2018 with serial number 207510 and higher.
Cylinder numbers: 5 - 6 - 7 - 8
Please note: please compare with reference 597097 because the assembly is different depending on the cylinder head.
Right cylinder head ignition coil for Indmar Raptor type engines after 2018 with serial number 207510 and higher.
Cylinder numbers: 1 - 2 - 3 - 4
Please note: please compare with reference 597100 because the assembly is different depending on the cylinder head.
Ignition coil for Honda BF175 to BF225 engine.
Electronic distributor for GM181 3 litre 4 cylinder engine.
Materials included in kit 550001.
Electronic ignition module for HEI type distributor.
Capacitor for Mallory brand igniter.
Complete spark plug wire set including coil wire for OMC FORD 7.5 litre 460 engine.
Complete spark plug wire set for GM496 8.1 litre V8 engine with 8 coils.
Electronic distributor for GM HEI V8 engines with 5 and 5.7 liter displacement.
Materials included in kit 550002.
Ignition rotor for GM base V6 engine with HEI ignition.
Distributor head for Ford injection engine.
Ignition coil for Mercury and Mercruiser MPI engines.
Power wires connecting to coil 18-5433 with a pink wire + contact and a gray rev counter wire.
Gray socket.
Round electronic ignition coil with internal resistor for HEI type distributor.
More simply for an ignition without platinum screws, capacitor, breaker.
Ignition coil for the following Yamaha and Mercury outboard motors:
Mercury: 2 to 3.3HP 2-stroke
Yamaha: 9.9 to 15HP from 1996 to 2009
Ignition coil for the following Johnson - Evinrude engines:
- 1 cylinder: 2 to 3.3HP
- 2 cylinders: 4 to 48HP
- 3 cylinders: 50 to 75HP
- 4 cylinders: 80 to 140HP
- 6 cylinders: 150 to 250 HP
- 8 cylinders: 250 to 300HP
Electronic distributor for Ford 351 5.8 liter EFI multi-point injection engine.
Electronic ignition module for Mallory brand igniter.
Module to replace the existing one which cannot convert a conventional igniter.
Use on AP1677EST - RA107039M type igniters.