Trim sensors for marine engines and lower units

Accurate trim and tilt position feedback for boats

Crucial for managing your boat’s trim angle, the sensor for trim allows you to monitor the tilt of your engine in real time. Whether you sail with a Mercury, Volvo Penta or Yamaha engine, having reliable information on your dashboard is essential to reduce your fuel consumption and protect your propeller. DAM Marine offers a carefully selected range of original or adaptable sensors, with fast delivery so you never have to stay dockside.

The role of the trim sensor in your navigation

The trim system is an essential electro-hydraulic device used to adjust the angle between the thrust of the propeller and the hull of the boat. By changing this angle, the skipper controls the boat’s longitudinal trim angle, making it possible to correct a bow that is too high or, conversely, to optimize the hull surface in contact with the water. Navigation with precise adjustment promotes better planing speed and ensures greater stability, even in choppy water.

From a technical standpoint, the sensor, often called a potentiometer, acts as the system’s sender. Installed at the sterndrive or engine bracket, it converts the physical position of the ram into an electrical signal. This information is then sent to the gauge located on the dashboard, allowing the boater to know the exact lift angle without having to look back. It is a major safety tool for avoiding damage to the sterndrive during maneuvers in shallow water or in cluttered fresh water.

DAM Marine’s advice: optimal trim adjustment can reduce your fuel consumption by up to 15% by limiting the hull’s hydrodynamic drag.

Select your engine brand: Volvo, Mercury, Yamaha

To guarantee perfect compatibility and maximum durability, DAM Marine distributes a wide range of accessories and spare parts suitable for the world’s leading engine manufacturers. Each manufacturer uses specific technologies, requiring dedicated components to ensure signal transmission:

Mercury / Mercruiser: we offer specific models for the famous sterndrives Alpha One, Bravo, as well as for outboard engines from 30 to 400 HP.
Volvo Penta: find robust solutions for your inboard Z-Drive transmissions, including gaskets kits and the necessary fasteners.
Yamaha and Suzuki: high-precision angle sensors designed for outboard engines of all generations, from 25 HP to 350 HP.

The diversity of our catalog allows us to meet every need, whether you are looking for an original manufacturer part or a quality adaptable alternative. We invite you to browse our dedicated brand categories to find the exact reference matching your serial number.

Symptoms of a faulty trim sensor and diagnosis

Identifying an angle indicator failure is essential to maintain steering comfort. The most common sign of a faulty sensor is a needle on the gauge that remains stuck in the up or down position, or moves jerkily with no relation to the actual tilt of the engine. In some cases, the display may become completely erratic, making trim angle adjustment impossible without visual reference.

The main cause of failure is corrosion. Constantly exposed to seawater and spray, the components undergo oxidation of the connectors or moisture infiltration into the potentiometer housing. Before replacing the part, it is advisable to carry out a technical test using a multimeter. You need to measure the resistance (Ohms) at the sensor terminals while operating the trim. You should observe a smooth variation in the value, with no break (infinite resistance) and no sudden jump. Always refer to your engine’s workshop manual for the exact resistance values (e.g. 10-167 Ohms for certain Mercury models), as they differ depending on the manufacturer.

Observed symptom	Probable cause
Needle stuck at maximum	Open circuit or broken wire
Unstable values while navigating	Oxidation of the contacts or worn internal track
Display stuck at the bottom	Short circuit or sensor seized

Choosing correctly: analog (2-wire) or digital (3-wire)

A major technical confusion when purchasing lies in choosing between an analog or digital model. The sensor of the analog type generally uses a 2-wire harness. Its operation is based on a simple variation in electrical resistance to drive a classic needle gauge. This is the most common setup on older engines or standard systems.

Conversely, the digital sensor (often linked to SmartCraft or NMEA technologies) uses a 3-wire harness. This system transmits much more precise digital data to the boat’s computer network, allowing display on multifunction screens. When ordering, you must check the shape of the connectors (round or flat) and the wire colors (often black for ground). Also note that on some Mercruiser setups, the position sensor is located on the starboard side, while the trim limit switch is located on the port side of the ram.

Important check: always count the number of wires coming out of your current part before confirming your cart to avoid any compatibility error.

Un doute? > contact us

Trim sensors

Mercruiser trim sensor

CAPTEUR DE TRIM Mercury - mariner

CAPTEUR DE TRIM Omc

Suzuki trim sensor

Volvo Penta trim sensor

50 item(s)

SEGMENTS DENTE TRIM BASE VOLVO

RÉF. 872812 | SLP

Volvo Penta drive trim sector gear:

290, 290A, 290DP

SP-A, SP-A1, SP-A2

SP-C, SP-C1

SP-E

DP-A, DP-A1, DP-A2

DP-B, DP-B1

DP-C, DP-C1

DP-D, DP-D1

DP-E

DP-G

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€6.00 VAT included

€5.00 VAT excluded

VOLVO DP BASE TRIM SENSOR

RÉF. AP9183

Trim indicator to provide the position of the Volvo Penta DP and SP drive.

Sensor present on the base helmet.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€144.00 VAT included

€120.00 VAT excluded

VOLVO TRIM GEAR WHEEL

RÉF. 852984 | SLP

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€42.00 VAT included

€35.00 VAT excluded

OMC COBRA 2F BASE TRIM SENSOR

RÉF. 18/7634

2-wire trim sensor for OMC cobra and SX bases before 1995.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€174.00 VAT included

€145.00 VAT excluded

CAPTEUR DE TRIM EMBASE SUZUKI - 34801-93J04

RÉF. AP9304 | DAM MARINE

Capteur de trim pour Suzuki DF200, DF225 et DF250

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€129.97 VAT included

€108.31 VAT excluded

MERCRUISER ANALOGUE TRIM SENSOR BASE 2PCS

RÉF. 805320A1 | MERCRUISER

Trim sensor kit for Mercruiser Alpha One and Bravo bases with analog instrumentation.

Kit including 2 trim sensors with 2 black wires.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€94.24 VAT included

€78.53 VAT excluded

VOLVO 3F SX - DP-S BASE TRIM SENSOR

RÉF. AP9411

Trim sensor to provide the position of the Volvo Penta or OMC SX drive.

Gray color sensor with 3 wires:

- Black

- Black - brown

- White

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€144.00 VAT included

€120.00 VAT excluded

MERCURY ANALOGUE TRIM SENSOR BASE

RÉF. 8M0098273 | MERCRUISER

Trim sensor for Mercury outboard motors with analog needle instrumentation.

Port side mounting.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€48.48 VAT included

€40.40 VAT excluded

MERCRUISER HP 3-WIRE TRIM SENSOR

RÉF. 863187A2 | MERCRUISER

Trim sensor for Mercruiser base types BRAVO XR - XZ or ITS in analog or digital mounting.

3-wire trim sensor in colors: blue - red and white.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€122.10 VAT included

€101.75 VAT excluded

MERCURY DIGITAL 896688001 TRIM SENSOR BASE

RÉF. 896688001 | MERCRUISER

Trim sensor for Mercury outboard motors with digital instrumentation with LEDs.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€197.86 VAT included

€164.88 VAT excluded

MERCRUISER DTS BASE TRIM SENSOR 1PCS

RÉF. 8M0095310 | MERCRUISER

Trim sensor for Mercruiser engine in DTS.

Blue - white - red colored threads.

Kit including a DTS 3-wire trim sensor and a plastic cover.

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€172.09 VAT included

€143.41 VAT excluded

MERCRUISER DTS LOWER TRIM SENSOR - ANALOGUE 2PCS

RÉF. 8M0107462 | MERCRUISER

Trim sensor kit for Mercruiser outboard including a Smartcraft 3-wire trim sensor and a 2-wire analog trim sensor for all Mercruiser engines equipped with Smartcraft instrumentation requiring an analog input.

- 3-wire DTS sensor: red - blue - white

- 2-wire analog sensor: black

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€296.83 VAT included

€247.36 VAT excluded

VOLVO 2F BASE TRIM SENSOR

RÉF. AP9169 | VOLVO PENTA

Trim sensor to provide the position of the Volvo Penta XDP drive.

Black color sensor with 2 wires:

- Black

- Black - brown

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€407.04 VAT included

€339.20 VAT excluded

VOLVO 3F BASE TRIM SENSOR

RÉF. AP9045 | VOLVO PENTA

Trim sensor to provide the position of the Volvo Penta SX-A and DPS-B drive.

Sensors with 3 wires with x-drive:

- Black

- Black - brown

- Green - red

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€296.28 VAT included

€246.90 VAT excluded

VOLVO 3F DPS DIGITAL TRIM SENSOR BASE

RÉF. SEN2399 | VOLVO PENTA

DPS-M digital base with 3 color wires:

- Black

- Black - brown

- Red

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€434.64 VAT included

€362.20 VAT excluded

VOLVO TRIM SENSOR BASE - 3818189

RÉF. SEN189 | VOLVO PENTA

Livraison express → Tuesday 15 September

Livraison classique → Thursday 17 September

Commandez dans les

00 h 00 m 00 s

Disponible

€416.64 VAT included

€347.20 VAT excluded

50 item(s)

Vous ne trouvez pas votre pièce moteur bateau ?

(c’est bateau)

Devis gratuit

Oil circuit

Upper Engine

Lower Engine

Exhaust

Electrical parts

Power steering and Steering

Filter by engine

Trim sensors for marine engines and lower units

Accurate trim and tilt position feedback for boats

The role of the trim sensor in your navigation

Select your engine brand: Volvo, Mercury, Yamaha

Symptoms of a faulty trim sensor and diagnosis

Choosing correctly: analog (2-wire) or digital (3-wire)

50 item(s)

SEGMENTS DENTE TRIM BASE VOLVO

VOLVO DP BASE TRIM SENSOR

VOLVO TRIM GEAR WHEEL

OMC COBRA 2F BASE TRIM SENSOR

CAPTEUR DE TRIM EMBASE SUZUKI - 34801-93J04

MERCRUISER ANALOGUE TRIM SENSOR BASE 2PCS

VOLVO 3F SX - DP-S BASE TRIM SENSOR

MERCURY ANALOGUE TRIM SENSOR BASE

MERCRUISER HP 3-WIRE TRIM SENSOR

MERCURY DIGITAL 896688001 TRIM SENSOR BASE

MERCRUISER DTS BASE TRIM SENSOR 1PCS

MERCRUISER DTS LOWER TRIM SENSOR - ANALOGUE 2PCS

VOLVO 2F BASE TRIM SENSOR

VOLVO 3F BASE TRIM SENSOR

VOLVO 3F DPS DIGITAL TRIM SENSOR BASE

VOLVO TRIM SENSOR BASE - 3818189