List of products by brand COLE HERSEE

12 volt relay with black waterproof coating with a capacity of 85 Amps continuous.

Cole Hersee brand 3-position key switch in brass with the following characteristics:

- OFF - ON - START

- 3 plots

- 2 keys included

- Thread length: 35mm

- Protective cover included.

Waterproof rocker switch SPST ON - OFF contact.

This module is ideal for intermittent lifting applications. It can also be used on winches, hatches, intake/exhaust fans, vehicle stabilizers, and other reversing applications. When the appropriate control circuit is energized with a pulse, it will reverse the motor direction.

High performance tin contacts ensure long life.

70A at 12Vdc intermittent, max On time 5 mins- Off time 3 mins-

50A at 12Vdc continuous.

Charging current: 150A.

Pull-up voltage of 7.8V max.

Low coil current.

Coil resistance 82? 10%.

Vibration resistance: 10-55Hz. Double amplitude 1.5mm.

Environment: -40C to 85C. Rust and moisture resistant plastic housing.

Fully waterproof IP-67 with high resistance for total protection against moisture.

Protected against inflammation.

Tin-plated brass studs and nuts for corrosion resistance.

Dielectric strength: 500 V RMS between antenna and contact.

For intermittent operation Mom-On-Off-Mom On- for continuous operation On-Off-On.

Thermal circuit breakers, single-pole 50 Amperes for surface mounting.

The visible reset button allows you to see whether the circuit breaker is engaged or not.

These circuit breakers are generally used in auxiliary and accessory circuits.

Amplifier circuit breakers comply with SAE J1117 and J1625 standards for ignition protection.

• Agency Approvals: UL Approved 32V DC

• Interruption rating: 300 A at 30 V

• Ignition protection: SAE J1625 and J1171

• Material(s): Thermoset plastic UL Rating 94VO

• Temperature range: -32C to 92C

Electrical circuit breaker with a capacity of 2500 Amps.

Equipment for remotely controlling all types of electrical installations requiring extreme constraints.

While traditional current isolating switches require minimal current when turned on, models with a "mechanical ON-OFF" position, such as the 08097160 series battery disconnect, draw current only during the travel phase or when switched from (OFF) to (ON) and vice versa. Typically referred to as "zero-consumption bistables," their switches rotate in the closed or open state of the electrical circuit.

The 08097160 Series Remote Battery Disconnect Switch is available in various configurations with options for 250A or 350A continuous voltage rating, 24V or 12V coil voltage rating, and 4-way DIN or 7-way DIN connectors.

Features and Benefits

Continuous current rating of 250A or 350A and maximum short circuit rating of 1500A at 30 seconds allow use in high current applications

Various configurations are available with a maximum nominal voltage of 32 V DC or 16 V DC

Protection against dust and water jets according to IP65 standards for use in commercial vehicles

Remote controlled battery disconnect with options for 4-way DIN or 7-way DIN connectors

Single-pole, single-throw (SPST) circuits

Coil voltage options include 12V DC and 24V DC

Applications

Heavy trucks

Construction

Agriculture

Bus

Navy

20amp fuse for Johnson - Evinrude outboard motor.

Length: 16mm.

Waterproof rocker switch SPDT contact (momentary) - ON - OFF - ON.