MERCRUISER BRAVO GEARBOX BELLOWS
Cardan bellows for Mercruiser Bravo outdrive.
Bellows including ring.
Cardan bellows for Mercruiser Bravo outdrive.
Bellows including ring.
Seawater suction hose for Volvo Penta SX and OMC Cobra outdrives with a diameter of 25mm - 1 inch, with 2 fixing clamps and the same diameter on both sides.
For assembly with a single collar, refer to reference 19890.
Complete maintenance kit for replacing the bellows on a Mercruiser Alpha One generation 2 base.
Kit including:
- Cardan bellows
- Cable bellows
- Exhaust bellows
- Water riser hose
- Bowl roll
- Reassembly seal kit
- Stainless steel collars
Seawater suction hose for Volvo Penta SX-M and DP-SM outdrives with a single mounting clamp and 2 different diameters on either side.
For mounting with two collars, refer to reference OM1830.
Complete plate for Mercruiser Bravo base integrating the interior and exterior plate.
This plate assembly includes all the elements present on the transom when the base is removed, namely:
- Jacks
- Bellows
- Reversal cable
- Yoke
- Bowl
- Trim sensors
- Reassembly kit including axles and screws.
- Interior counter plate
Remember to add the reassembly seals 28400 and 41802
Exhaust bellows for Volvo Penta DP-G and DPX-A types.
Complete plate for Mercruiser Alpha One generation 2 base after 1990.
The plate includes all the elements present on the transom when the base is removed.
Namely: plate, caliper, fork, bellows, trim sensor, reversing cable, all the positions present on the plate.
Plate with oil passage for the internal oil reservoir.
Mercruiser exhaust reducer bellows with diameters of 80 and 100mm.
Water riser hose for Volvo Penta base with 2 clamps.
Seawater riser hose for Alpha one base, 19mm diameter.
2 collars reference TOR16/13 to add.
Water riser hose diameter 16mm for old Alpha one generation 1 base.
Please note that despite the fact that your base is an Alpha One G1, you may have a hose with a diameter of 19mm and not 16mm.
Seawater suction hose for Mercruiser Bravo outdrive with design I.
Water riser hose for Volvo Penta SX-A and DPS-A drives:
DPS-A, DPS-B, DPS-B1, DPS-D1
FWD-B1, FWD-B2, FWD-D1, FWD-D2
SX-A, SX-D
Water riser hose for Volvo Penta outdrive with an O-ring and a clamp.
Volvo base applications:
290, 290A, 290DP,SP-A, SP-A1, SP-A2, SP-C, SP-C1,DP-A, DP-A1, DP-A2, DP-B, DP-B1, DP-C, DP-C1, DP-D, DP-D1,DPX, DPX-A, DPX-R, DP-G
Soufflet d'échappement pour embase Mercruiser Bravo disposant d'un seul collier de serrage ( libre en parti arrière ).