VETUS Hoses & Workshop Equipment for Boats - Page 2

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 100 mm.

Also available in a straight, 60º or 90º bend type.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 150 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 125 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 100 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 90 mm

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 254 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 203 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 152 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 127 mm.

Also available in a straight, 60º or 90º bend type.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 225.

Suitable for: Exhaust.

Max. pressure (bar): 3.5.

Weight (kg): 2.06.

Inner diameter (mm): 76.

Outer diameter (mm): 87.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 190.

Suitable for: Exhaust.

Max. pressure (bar): 3.5.

Weight (kg): 1.60.

Inner diameter (mm): 63.

Outer diameter (mm): 74.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 150.

Suitable for: Exhaust.

Max. pressure (bar): 4.

Weight (kg): 1.31.

Inner diameter (mm): 51.

Outer diameter (mm): 61.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Radius of curvature (mm): 95.

Suitable for: Exhaust.

Max. pressure (bar): 4.

Weight (kg): 0.85.

Inner diameter (mm): 38.

Outer diameter (mm): 47.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Radius of curvature (mm): 80.

Suitable for: Exhaust.

Max. pressure (bar): 4.5.

Weight (kg): 0.73.

Inner diameter (mm): 32.

Outer diameter (mm): 41.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Radius of curvature (mm): 62.

Suitable for: Exhaust.

Max. pressure (bar): 5.

Weight (kg): 0.60.

Inner diameter (mm): 25.

Outer diameter (mm): 35.

Length: 20m.

Made from premium silicone rubber with an encapsulated steel spiral for a perfect exterior finish.

This flexible hose is highly resistant to aging and is suitable for a wide range of applications (exhaust, cooling and waste water hose).

Temperature range from -54 to 177 ºC (intermittently up to 250 ºC).

The SIHOSE type meets all the requirements of ISO13363 type B and SAE J 2006 R1 standards.

Features :

Bend radius (mm): 360.

Suitable for: Exhaust.

Max. pressure (bar): 2.0.

Weight (kg): 2.7.

Inner diameter (mm): 102.

Outer diameter (mm): 113.

Length: 20m.