VETUS standard bow thruster

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight thanks to synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 105kgf

Spark protection available: yes

Power (kw-hp): 5.7kw / 8hp

DC motor: 24V

Recommended boat length (ft - m): 36' to 55' / 11.50m to 17m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 26 kg

For DC system Volt: 24V

Main battery switch: BATSW250 - BPMAIN24

Main fuse: 200

CCE battery in EN value (min/max): 533/1067

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight thanks to synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 95kgf

Spark protection available: yes

Power (kw-hp): 5.7kw / 8hp

DC motor: 12V

Recommended boat length (ft - m): 36' to 55' / 11.50m to 17m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 26 kg

For DC system Volt: 12V

Main battery switch: BATSW600 - BPMAIN12

Main fuse: 425

CCE battery in EN value (min/max): 1083/2166

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 85kgf

Spark protection available: yes

Power (kw-hp): 4.4kw / 6hp

DC motor: 24V

Recommended boat length (ft - m): 30' to 45' / 10m to 14m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 19 kg

For DC system Volt: 24V

Main battery switch: BATSW250 - BPMAIN24

Main fuse: 200

CCE battery in EN value (min/max): 525/1050

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 70kgf

Spark protection available: no

Power (kw-hp): 3kw / 4hp

DC motor: 24V

Recommended boat length (ft - m): 27' to 40' / 8m to 12.5m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 17 kg

For DC system Volt: 24V

Main battery switch: BATSW250 - BPMAIN24

Main fuse: 100

CCE battery in EN value (min/max): 275/550

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 80kgf

Spark protection available: yes

Power (kw-hp): 4.4kw / 6hp

DC motor: 12V

Recommended boat length (ft - m): 30' to 45' / 10m to 14m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 19 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 355

CCE battery in EN value (min/max): 917/1833

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 65kgf

Spark protection available: no

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 27' to 40' / 8m to 12.50m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 17 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 200

CCE battery in EN value (min/max): 500/1000

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight thanks to synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 60kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 24V

Recommended boat length (ft - m): 26' to 39' / 8m to 12m

Nozzle diameter (mm-inch): 150mm / 5.9"

Weight without tunnel: 17 kg

For DC system Volt: 24V

Main battery switch: BATWS250 - BPMAIN24

Main fuse: 200

CCE battery in EN value (min/max): 342/683

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 55kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 39' / 8m to 12m

Nozzle diameter (mm-inch): 150mm / 5.9"

Weight without tunnel: 17 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 250

CCE battery in EN value (min/max): 650/1250

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 45kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 37' / 8m to 11.5m

Nozzle diameter (mm-inch): 125mm / 4.92"

Weight without tunnel: 16 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 250

CCE battery in EN value (min/max): 625/1250

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 40kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 34' / 8m to 10.50m

Nozzle diameter (mm-inch): 140mm / 5.5"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 35kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 20' to 30' / 6m to 10m

Nozzle diameter (mm-inch): 125mm / 4.92"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 285kgf

Spark protection available: no

Power (kw-hp): 17.5kw / 23.5hp

DC motor: 48V

Recommended boat length (ft - m): 60' to 100' / 20m to 30m

Nozzle diameter (mm-inch): 300mm / 11.8"

Weight without tunnel: 68 kg

For DC system Volt: 48V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 933/1866

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 25Kkgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): less than 24' / less than 7m

Nozzle diameter (mm-inch): 110mm / 4.33"

Weight without tunnel: 10 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 125

CCE battery in EN value (min/max): 333/667

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 220kgf

Spark protection available: no

Power (kw-hp): 11kw / 15hp

DC motor: 24V

Recommended boat length (ft - m): 50' to 75' / 16m to 22m

Nozzle diameter (mm-inch): 300mm / 11.8"

Weight without tunnel: 68 kg

For DC system Volt: 24V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 500

CCE battery in EN value (min/max): 1267/2533

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 180kgf

Spark protection available: no

Power (kw-hp): 7 kw / 9.5hp

DC motor: 24V

Recommended boat length (ft - m): 46' to 70' / 14m to 22m

Nozzle diameter (mm-inch): 250mm / 9.8"

Weight without tunnel: 38 kg

For DC system Volt: 24V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 1268/2533

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Ces propulseurs d'étrave et de poupe VETUS DC originaux sont à la base d'une vaste gamme de propulseurs électriques DC tels que les Propulseurs CC standard, les propulseurs à autonomie prolongée, les propulseurs antidéflagrants et les propulseurs rétractables de VETUS. Développés et perfectionnés avec 40 ans de travail acharné, installé sur des bateaux du monde entier et fonctionnant dans toutes les conditions possibles.

Les avantages des propulseurs d'étrave VETUS sont infinis, mais ci-dessous nous soulignons les caractéristiques les plus importantes :

Nuisance sonore minimale en raison de la conception unique de l'hélice à six pales, engrenages coniques et accouplement flexible

Tableau de contrôle de haute qualité fabriqués en aluminium et interchangeables avec des panneaux plus anciens

Fluidité des écoulements grâce à une embase profilée

Interrupteur thermique intégré pour éviter la surchauffe

Élimine la corrosion et réduit le poids grâce aux hélices en matière synthétique

Haute performance, efficacité et moteur fiable à courant continu électrique à balais charbon

Installation facile et instructions claires

Utilisation simple et intuitive

Caractéristiques :

Poussée* : 35kgf

Protection anti-étincelage disponible : oui

Puissance (kw-hp) : 1.5kw / 2hp

Moteur D.C. : 12V

Longueur de bateau conseillée (ft - m) : 20' à 30' / 6m à 10m

Diamètre tuyère (mm-inch) : 150mm / 5.9"

Poids sans tunnel : 12Kg

Pour système DC Volt : 12V

Coupe batterie principal : BATSW250 - BPMAIN12

Fusible principal : 160

Batterie CCE en valeur EN (min/max) : 367/733

* Tous les propulseurs VETUS DC sont évalués à une tension de batterie de 10,5 ou 21 VDC. Cela prend en compte la chute de tension provoquée par le propulseur.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features:

Thrust*: 160kgf

Spark protection available: yes

Power: 7kw / 9.5hp

DC motor: 24V

Recommended boat length (ft - m): 44' to 68' / 15m to 20m

Nozzle diameter (mm-inch): 250mm / 9.88"

Weight without tunnel: 38 kg

For DC system Volt: 24V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 933/1866

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 140kgf

Spark protection available: yes

Power (kw-hp): 5.7kw / 8hp

DC motor: 24V

Recommended boat length (ft - m): 40' to 60' / 12.5m to 18m

Nozzle diameter (mm-inch): 250mm / 9.8"

Weight without tunnel: 32 kg

For DC system Volt: 24V

Main battery switch: BATSW250 - BPMAIN24

Main fuse: 300

CCE battery in EN value (min/max): 783/1567

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 125 kgf

Spark protection available: yes

Power: 5.7kw / 8hp

DC motor: 12V

Recommended boat length (ft - m): 40' to 60' / 12.5m to 18m

Nozzle diameter: 250mm / 9.8''

Weight without tunnel: 32 kg

For DC system: 12V

Main battery switch: BATSW600 - BPMAIN12

Main fuse: 500

Battery CCA in EN value (min/max): 1400/2800

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.