Exhaust outlets for marine engines - Page 3

Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.

Durite disposant d'une surface lisse pour un meilleur serrage des colliers.

Vendu au mètre linéaire.

Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Exhaust hose for Volvo Penta V6 - V8 engine with 95mm diameter.

Exhaust hose diameter 90 and 100mm, height 75mm.

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC90SV

For hose (inner diameter): 90 mm

Dimension A: hole diameter 91 mm

Dimension B: diameter 123 mm

Dimension C: 110 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC90PV

For hose (inner diameter): 90 mm

Dimension A: hole diameter 97 mm

Dimension B: diameter 140 mm

Dimension C: 95 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC75SV

For hose (inner diameter): 75 mm

Dimension A: hole diameter 77 mm

Dimension B: diameter 110 mm

Dimension C: 93 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC75PV

For hose (inner diameter): 75 mm

Dimension A: hole diameter 97 mm

Dimension B: diameter 140 mm

Dimension C: 95 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC7590R

For hose (inner diameter): 76 and 90 mm

Dimension A: hole diameter 111 mm

Dimension B: diameter 164 mm

Dimension C: 90 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC60SV

For hose (inner diameter): 60 mm

Dimension A: hole diameter 61 mm

Dimension B: diameter 94 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC60PV

For hose (inner diameter): 60 mm

Dimension A: hole diameter 68 mm

Dimension B: diameter 108 mm

Dimension C: 75 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC60R

For hose (inner diameter): 60 mm

Dimension A: hole diameter 73 mm

Dimension B: diameter 114 mm

Dimension C: 86 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC50R

For hose (inner diameter): 51 mm

Dimension A: hole diameter 63 mm

Dimension B: diameter 114 mm

Dimension C: 86 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC50SV

For hose (inner diameter): 50 mm

Dimension A: hole diameter 51 mm

Dimension B: diameter 84 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC50PV

For hose (inner diameter): 50 mm

Dimension A: hole diameter 68 mm

Dimension B: diameter 108 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC45SV

For hose (inner diameter): 45 mm

Dimension A: hole diameter 46 mm

Dimension B: diameter 79 mm

Dimension C: 75 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC45R

For hose (inner diameter): 45 mm

Dimension A: hole diameter 58 mm

Dimension B: diameter 114 mm

Dimension C: 86 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC45PV

For hose (inner diameter): 45 mm

Dimension A: hole diameter 52 mm

Dimension B: diameter 88 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC40SV

For hose (inner diameter): 40 mm

Dimension A: hole diameter 41 mm

Dimension B: diameter 74 mm

Dimension C: 75 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC40R

For hose (inner diameter): 40 mm

Dimension A: hole diameter 53 mm

Dimension B: diameter 87 mm

Dimension C: 86 mm