Boat propellers - Reliable marine propulsion performance - Page 3

Brass hydrolube ring with the following metric dimensions:

Shaft: 40 mm

Outer diameter: 55 mm

Total length: 160 mm

Other variations on request.

Complete 15-spline 700 series propeller hub kit for engines over 200HP from the following brands:

- Yamaha

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Complete 10-spline 20-series propeller hub kit for 20-30 hp engines from the following brands:

- Yamaha

- Parsun

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Complete 8-spline 200 series propeller hub kit for 6 to 15 HP engines from the following brands:

- Mercury

- Mariner

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Kit moyeu pour moteurs hors-bords Evinrude/Johnson et embases OMC disposant de 15 cannelures.

Attention ! Lors de l'installation des hélices en acier inoxydable, supprimer l'anode fixée au corps de palier et vérifier le jeu avant l'opération.

835467008 Rondelle de poussée avant

879637 Manchon d'entraînement en plastique

834899Q Adaptateur arrière

8M0107489 Écrou

89961 Goupille fendue

8M0118201 Rondelle d'espacement

Express Mach3 OS 3-blade stainless steel propeller with dimensions 15.6X21 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

The new Express Mach3 OS series of large-diameter stainless steel propellers feature the latest developments and are the hallmarks of the Turning Point brand. These modifications have produced a propeller that provides excellent planing, impressive bow lift, and exceptional turning performance. The Express Mach3 OS is ideally suited to high-powered boats. It is suitable for all outboards from 90 hp and above, as well as sterndrives. The large-diameter, three-bladed propellers offer excellent fuel economy in many applications.

Hélice 3 pales aluminium de dimensions 14.25X17 en rotation droite RH.

Fonctionne avec les systèmes de moyeu série 500 ou 700 à rajouter lors de l'achat.

Les évents permettent aux gaz de s'échapper, réduisant ainsi la densité d'eau autour des pales pendant l'accélération. Ceci permet à l'hélice de tourner plus rapidement à faible vitesse, améliorant sa puissance. Plus de puissance à faible vitesse assure une meilleure accélération et un déjaugeage plus rapide. Turning Point est le seul fabricant offrant cette technologie sur des hélices aluminium.

Le rake important réduit l'effet de Vortex produit par l'hélice et aide au soulèvement de la poupe du bateau et améliore les performances globales.

La manoeuvrabilité et le déjaugeage sont améliorés grâce au pas évolutif et au cup de l'hélice.

Le processus de fabrication en 5 étapes délivre une finition uniforme, durable, de haute qualité, agréable à l'oeil et anti-corrosion.

3-blade aluminum propeller measuring 13.25X21 in right rotation RH.

Works with 500 series hub systems to be added at time of purchase.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing. Turning Point is the only manufacturer offering this technology on aluminum propellers.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller measuring 12.5X8 in right rotation RH.

Works with 10 series hub systems to be added at time of purchase.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller with dimensions 10.125X13 in right rotation RH.

Works with 20 series hub systems to be added at time of purchase.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller measuring 9X10 in right rotation RH.

Works with 200 series hub systems to be added at time of purchase.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

Mercruiser Black Max 9.3 x 9 Propeller - 3 blades in standard rotation.

Hub kit included.

Hélice moyeu long en rotation droite RH de 15X17

Hélice moyeu long en rotation gauche LH de 15X19.

Kit d'hélices origines / OEM Volvo penta duoprop - DP type B4 incluant :

3 pales avant : 854825

3 pales arrière : 854833

Applications moteurs essence.

Kit d'hélices origines / OEM Volvo penta duoprop - DP type B3 incluant :

3 pales avant : 854824

3 pales arrière : 854832

Applications moteurs essence.

Kit d'hélices origines / OEM Volvo penta duoprop - DP type D7 incluant :

3 pales avant : 3856347

3 pales arrière : 3856357

Applications embases Volvo Penta types : DPS - DP-S

Kit d'hélices origines / OEM Volvo penta duoprop - DP type D4 incluant :

3 pales avant : 3851424

3 pales arrière : 3851444

Applications embases Volvo Penta DPS - DP-S

Hélice Mercruiser Black Max 15.25 x 15 - 3 pales en rotation standard.

Kit moyeu inclus.

Brass hydrolube ring with the following metric dimensions:

Shaft: 35 mm

Outside diameter: 47.6 mm or 1-7/8".

Total length: 140 mm

Other variations on request.