Boat control boxes - Smooth throttle and transmission control

Black and chrome side-mounted control box for Mercruiser inboard engines with trim.

Use on G2 control cable.

Mercruiser recessed side handle clutch release button.

length under head 6cm Ø 2.8cm overall length 7cm.

Double console box for Suzuki twin engine with trim and cable control.

Black and chrome console control box for replacement of the 4500 series on Mercury outboard motors with trim.

Mountings provided for G2 type control cables.

Dual function, ideal for inboard. Chrome casing, equipped with a safety start...

Replacement for Teleflex MT-3 series.

Dual function, ideal for inboard engines. Chrome-plated housing, equipped with a safety start...

Replacement for Teleflex MT-3 series.

Console control box for replacement of the 4500 series on Mercury outboard twin engines with trim control.

Mounting intended for G2 type control cables.

Black and chrome dual console control box for Mercruiser inboard engine with trim.

Use on G2 control cable.

Single black and chrome console control box for Mercruiser inboard engine with trim.

Use on G2 control cable.

Non-recessed side control box for Mercury engine with 600A control cable including the following stations:

- Key switch

- Circuit breaker

- Extension harness ending in 14 male Deutch type pins.

Consider the following adapters:

- old 8-pin assemblies allowing you to convert Deutch 14-pin tips into 8 mixed pins: 84-896539T01

- Analog rectangular socket assemblies: 84-892990T01

Single console control box with trim and extension harness.

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 2

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 2 with trim control

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 1 on the left

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 1 on the right

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 1 left with trim control

VETUS dual lever control box for console mounting with synthetic housing and levers. Console mounting for twin engines.

Features:

Length: 154 mm

Width: 1208 mm

Height: 238 mm

With cast aluminum housing and AISI 316 stainless steel levers.

VETUS two-lever control for console mounting.

Features:

Length: 162 mm

Width: 200 mm

Height: 237 mm

Recessed depth: 208 mm

With cast aluminum housing and AISI 316 stainless steel levers.

VETUS two-lever control for console mounting.

Features:

Length: 162 mm

Width: 200 mm

Height: 237 mm

Recessed depth: 208 mm