AXE INVERSEUR KANZAKI YANMAR 177095-03190

Take full control of your boat's propulsion with our marine gearboxes, designed for reliable shifting and efficient power transmission.
The reverse gear allows seamless switching between forward and reverse, ensuring precise, safe maneuvering in all conditions.
Our gearboxes provide a reliable connection between the engine and the propeller shaft, enhancing performance and protecting transmission components.
Built with corrosion-resistant materials, our gearboxes withstand harsh marine conditions and integrate with both inboard and hybrid propulsion systems.
Available for Volvo, Mercury, Mercruiser, OMC, PCM, and other marine propulsion systems.
Steel friction disc for ZF inverter with the following dimensions:
Outer diameter: 96.5mm
Tooth spacing: 1.77mm
Hurth Marine Application:
HSW630 hydraulic
HSW630 V-drive
HSW800
HSW800 V-drive
Bronze friction disc for ZF inverter with the following dimensions:
Outer diameter: 134mm
Thickness: 2 mm
36 teeth
Hurth Marine Application:
HSW630 hydraulic
HSW630 V-drive
HSW800
HSW800 V-drive
Disque de d'inverseur diamètre extérieur 88mm intérieur 68mm montage pour inverseur yanmar Kanzaki séries :
- KBW20
- KBW20-1
- KBW21
12 disques sont nécessaires par inverseur.
Bronze friction disc for Yanmar reverse gear type KBW10.
Steel friction disc for Yanmar reverse gear type KBW10.
Complete gasket kit for PCM 80A series inverter with a ratio of 1.23.
Complete gasket kit for the following inverters:
- ZF63A hydraulic
- Hurth HSW630 hydraulic
- ZF63IV - V-DRIVE
Kit suitable for all types of ZF63 inverter.
Kit réparation complet pour inverseurs de marque ZF de types suivants :
V-DRIVE : ZF63IV - ZF68IV - HSW630V
Hydraulique : ZF68/A - ZF68/A - HSW630A/H
Kit incluant :
8 Disques de friction
10 Disques entretoises
- Le kit joints ALT807D
- Le kit disques ALT750C
Kit of 12 pressure springs for Borg Warner brand inverter - Velvet drive type 71 and 72.
Jauge d'inverseur yanmar série KM3 - KM4.
Longueur du tube : 14cm
Jauge à huile d'inverseur Yanmar.
Longueur du tube : 9.5cm.
Kit de joints complet pour inverseur de marque Borg Warner - Velvet Drive série 71 ou 72.
Oil pump oil seal for Velvet Drive 71 - 72C series inverter.
Rear oil seal for Velvet Drive inverter series 71 - 72.
Selector seal for ZF series inverter:
- HSW450
- HSW630
- HSW800
Front face outlet oil seal for PCM brand V-Drive Power Plus in 1.48/1 ratio.
Complete seal kit for Hurth ZF inverter types HBW10 and HBW150.
Kit joints complet pour la réfection d'un inverseur de marque PCM série IRM40A - IRM40I disposant d'un ratio de 1.23 ou 1/1.
Output oil seal for PCM brand inverter type IRM40A.
Oil seal for Velvet 5000 series inverter.
Kit comprenant l'ensemble des joints pour un inverseur ZF en sortie direct ou V-DRIVE suivants :
Direct : ZF80A - ZF80-1A - ZF85A - HSW800A
V-DRIVE : ZF80IV - ZF80-1IV - ZF85IV - HSW800V
Full MRI80 reverse kit for GM type PCM engine with ratio 1.23/1.
IRM40 type reversers are now replaced by more robust IRM80 series reversers.
Kit including:
- Reverse
- Oil cooler
- Coupling
- Flexible
- Installation kit
Kit de réfection complet pour inverseur velvet drive série 71 ou 72 incluant les postes suivants :
- Kit de joints complet
- 7 petits disques bronze marche avant .060
- 6 petits disques aciers marche avant .068
- 2 grands disques aciers marche arrière R160009
- 3 grands disques bronze marche arrière R160008