Ref. DAM : COR61002

PROTECTION PRODUCT - REJEX FINISH - 473ML

33.6 €33.60 VAT included
€28.00 VAT excluded
Disponible
Livraison express Tuesday 15 September
|
Livraison classique Thursday 17 September
Commandez dans les
00 h 00 m 00 s
Disponible
33.6 €33.60 VAT included
€28.00 VAT excluded

Protective products for cars, boats, motorcycles, etc.

RejeX® is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all types.

This very thin film - less than one micron thick - prevents staining and adhesion of common contaminants such as exhaust fumes, insects, oil, tree sap, bird droppings, road grime, brake dust, etc.

NOTHING STICKS BUT SHINE!™

It's easy to apply and produces a deep, glossy shine that lasts for months.

RejeX does not contain any of the oils found in some other products known to contaminate paint and cause problems.

REJEX APPLICATION

Ideally, apply RejeX to a fresh, dry, clean surface.

When temperatures exceed 85°F, be sure to apply RejeX away from sunlight.

If the surface is too hot, the coating may harden before it has properly bonded to the surface, so it may not perform to its potential.

Let dry for about 20 minutes, wipe dry, then let dry for 8-12 hours (depending on humidity - the higher the humidity, the faster the cure).

Curing is necessary to allow the monomers (polymer building blocks) that make up RejeX to attach to the treated surface and bond into a clear, waterproof film.

It is important to allow RejeX to dry for 8 to 12 hours.

If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaning products, etc. before it has cured, the contaminants may interfere with or embed the protective film.

REJEX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC AND POLISHED METAL SURFACES

RejeX is not intended for use on porous surfaces, heavily oxidized painted surfaces, or to fill fine scratches.

RejeX can be applied in multiple coats, allowing 8 hours of cure time between coats for deeper color and greater depth of gloss.

RejeX has a higher refractive index than waxes, so it produces richer, deeper colors and a long-lasting glossy finish.

RejeX can be used over existing wax - however, the duration of protection will be reduced as the underlying wax degrades more quickly.

There is no reason to wax RejeX. As mentioned before, RejeX leaves a shinier and more durable finish than wax… If a RejeX-treated surface needs repainting, normal paint preparation is all that is required.

Abrasive cleaners, polishes, rubbing compounds, and some chemical strippers may remove RejeX.

Quantity
Vérifier la compatibilité Identifiez votre moteur pour vérifier la compatibilité de ce produit Vérifier la compatibilité

Protective products for cars, boats, motorcycles, etc.

RejeX® is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all types.

This very thin film - less than one micron thick - prevents staining and adhesion of common contaminants such as exhaust fumes, insects, oil, tree sap, bird droppings, road grime, brake dust, etc.

NOTHING STICKS BUT SHINE!™

It's easy to apply and produces a deep, glossy shine that lasts for months.

RejeX does not contain any of the oils found in some other products known to contaminate paint and cause problems.

REJEX APPLICATION

Ideally, apply RejeX to a fresh, dry, clean surface.

When temperatures exceed 85°F, be sure to apply RejeX away from sunlight.

If the surface is too hot, the coating may harden before it has properly bonded to the surface, so it may not perform to its potential.

Let dry for about 20 minutes, wipe dry, then let dry for 8-12 hours (depending on humidity - the higher the humidity, the faster the cure).

Curing is necessary to allow the monomers (polymer building blocks) that make up RejeX to attach to the treated surface and bond into a clear, waterproof film.

It is important to allow RejeX to dry for 8 to 12 hours.

If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaning products, etc. before it has cured, the contaminants may interfere with or embed the protective film.

REJEX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC AND POLISHED METAL SURFACES

RejeX is not intended for use on porous surfaces, heavily oxidized painted surfaces, or to fill fine scratches.

RejeX can be applied in multiple coats, allowing 8 hours of cure time between coats for deeper color and greater depth of gloss.

RejeX has a higher refractive index than waxes, so it produces richer, deeper colors and a long-lasting glossy finish.

RejeX can be used over existing wax - however, the duration of protection will be reduced as the underlying wax degrades more quickly.

There is no reason to wax RejeX. As mentioned before, RejeX leaves a shinier and more durable finish than wax… If a RejeX-treated surface needs repainting, normal paint preparation is all that is required.

Abrasive cleaners, polishes, rubbing compounds, and some chemical strippers may remove RejeX.

STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 9082514 thru 9107213
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 4141000 thru 4357639
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 2863739 thru 8029514
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 9001581 thru 9082513
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 7051983 thru 7068997
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 8029515 thru 8030089
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 2742142 thru 7051982
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 500 2858814 thru 4140999
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 3339688 thru 9076838
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 7047608 thru 7112422
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 8002335 thru 8027439
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 8027440 thru 8052124
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 3340783 thru 7047607
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 4117710 thru 4860102
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 9076839 thru 9184450
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402 3336258 thru 4117709
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402, 40 (2 cyl.) 7112423 thru 7144762
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402, 40 (2 cyl.) 9184451 thru 9251455
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402, 40 (2 cyl.) 4860103 thru 5556229
STARTER HOUSING
STARTER HOUSING Moteur mercury - mariner 402, 40 (2 cyl.) 8052125 thru 8064749
STARTER HOUSING (MANUAL)
STARTER HOUSING (MANUAL) Moteur mercury - mariner 500, 50 8030090 thru 8063984
STARTER HOUSING (MANUAL)
STARTER HOUSING (MANUAL) Moteur mercury - mariner 500, 50 7068998 thru 7143687
STARTER HOUSING (MANUAL)
STARTER HOUSING (MANUAL) Moteur mercury - mariner 500, 50 4357640 thru 5531629
STARTER HOUSING (MANUAL)
STARTER HOUSING (MANUAL) Moteur mercury - mariner 500, 50 9107214 thru 9248005
STARTER HOUSING ASSEMBLY
STARTER HOUSING ASSEMBLY Moteur mercury - mariner 402, 40 (2 cyl.) 5556230 & up
STARTER HOUSING ASSEMBLY
STARTER HOUSING ASSEMBLY Moteur mercury - mariner 402, 40 (2 cyl.) 8064750 & up
STARTER HOUSING ASSEMBLY
STARTER HOUSING ASSEMBLY Moteur mercury - mariner 402, 40 (2 cyl.) 7144763 & up
STARTER HOUSING ASSEMBLY
STARTER HOUSING ASSEMBLY Moteur mercury - mariner 402, 40 (2 cyl.) 9251456 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 50 (4 cyl.) 5531630 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 50 (4 cyl.) 9248006 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 50 (4 cyl.) 8063985 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 50 (4 cyl.) 7143688 & up
Starter Rewind
Starter Rewind Moteur mercury - mariner 45 (4 cyl.) 0b110789 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 45 (4 cyl.) 5531630 thru 0b110788
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 45 (4 cyl.) 9248006 thru 9466691
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 45 (4 cyl.) 8063985 & up
Starter Rewind
Starter Rewind Moteur mercury - mariner 45 (4 cyl.) 0a719281 & up
Starter Rewind
Starter Rewind Moteur mercury - mariner 45 (4 cyl.) 9466692 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 45 (4 cyl.) 7143688 thru 0a719280
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 40 (4 cyl.) 9570790 and up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 35 9466647 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 35 b110789 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 40 (4 cyl.) 0c159200 and up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 35 (2 cyl.) 6445653 thru 0b110788
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 35 (2 cyl.) 209608 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 35 (2 cyl.) 9384476 & up
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 30 jet 0c159200 thru 0g589999
STARTER REWIND
STARTER REWIND Moteur mercury - mariner 30 jet 9570790 and up
Loading...