GM - FORD STD SEGMENTS
Set of rings for a standard size piston on GM or Ford base engines with a bore of 101.60mm.
Segment height: 2 - 2 - 4.8mm
Set of rings for a standard size piston on GM or Ford base engines with a bore of 101.60mm.
Segment height: 2 - 2 - 4.8mm
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Universal triangular coupling with 26 splines.
Volant moteur petit diamètre 32.5cm extérieur pour montage sur moteur Volvo Penta après 1988 disposant d'un joint spi de vilebrequin en 1 morceau et d'une couronne 153 dents.
Volant moteur généralement utilisé sur les moteurs Volvo essence en montage avec embase 280-290.
Exemple AQ205 - 271 ...
Set of bearings for a standard size connecting rod with a diameter of 53.34mm and a width of 21.3mm.
Please note that for recent 4-cylinder 3-litre GM181 engines ONLY which have bearings with a width of 19mm, please refer to reference 23-804982.
Reconditioned connecting rod for small block V8 engine of 5 litre or 5.7 litre types.
Damper avant pour montage en bout de vilebrequin disposant d'un diamètre de 170mm.
Rear crankshaft oil seal including mounting hardware for multiple GM base 4 cylinder, V6 and V8 engines.
For assembly with a slight flange on the seal, refer to reference 5512.
Hydraulic tappet with a roller to follow the camshaft lobes.
Unlike the RHT817 pushers which are flat.
Exhaust valve for GM Vortec type engines with a single keyway.
head diameter 38.2mm
tail diameter 8.8mm
height 125mm
Seawater suction pump with fixing by 3 BTR screws at the end of the crankshaft.
Features :
- Turbine height 32mm
- 32mm diameter outlets
Fixing screw 3 pcs: 800047B
Fixing bracket: VP826421
Vis de maintient de poulie damper pour moteur V6 et V8 GM Small block.