GM V8 CONNECTING ROD - SB
Reconditioned connecting rod for small block V8 engine of 5 litre or 5.7 litre types.
Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
Reconditioned connecting rod for small block V8 engine of 5 litre or 5.7 litre types.
Set of bearings for a standard size connecting rod with a diameter of 53.34mm and a width of 21.3mm.
Please note that for recent 4-cylinder 3-litre GM181 engines ONLY which have bearings with a width of 19mm, please refer to reference 23-804982.
Small diameter flywheel 32.5cm outside for mounting on Volvo Penta engines after 1988 with a 1-piece crankshaft oil seal and a 153-tooth crown.
Flywheel generally used on Volvo petrol engines in assembly with 280-290 base.
Example AQ205 - 271 ...
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Hydraulic tappet with a roller to follow the camshaft lobes.
Unlike the RHT817 pushers which are flat.
Set of rings for a standard size piston on GM or Ford base engines with a bore of 101.60mm.
Segment height: 2 - 2 - 4.8mm
Piston for GM V8 engine with 101.60mm bore, standard size.
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Universal triangular coupling with 26 splines.
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
2-groove crankshaft end pulley.
Front damper for mounting on the end of a crankshaft with a diameter of 170mm.
Rear crankshaft oil seal including mounting hardware for multiple GM base 4 cylinder, V6 and V8 engines.
For assembly with a slight flange on the seal, refer to reference 5512.
Exhaust valve for GM Vortec type engines with a single keyway.
head diameter 38.2mm
tail diameter 8.8mm
height 125mm
Seawater suction pump with fixing by 3 BTR screws at the end of the crankshaft.
Features :
- Turbine height 32mm
- 32mm diameter outlets
Fixing screw 3 pcs: 800047B
Fixing bracket: VP826421
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.