ZR COLLECTOR STUD

Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
V-DRIVE Power Plus / PCM angle drive only in 1.48:1 ratio to be completed with the IRM80 series inverter to obtain a complete set.
Replacing older generations may require changing the media.
2 cans of R190251 oil are required.
90° elbow cooling connector male - male for Crusader manifolds types: 97993 - 97992 - 97753 - 97752
Thread: 1'
Hose: 32mm 1-1/4"
For assembly with purge see reference 30624.
IRM80-type PCM reversor with a ratio of 1.23/1 and an electrical inversion control.
Complete inverter from Velvet Drive - Borg Warner type 71C with a ratio of 1/1.
GM small block application.
Fixing bolt for inverter.
Engine coupling with 15 splines replacing the old assemblies for PCM Power plus 1.23 and PCM 1:1 inverters.
Features:
- 15 grooves
- External diameter: 335mm
- Inner diameter: 25mm
- Height: 31mm
New generation of PCM damper replacing the old generation triangular type couplings (R140016 and R140016A) on PCM IRM40A inverter.
For Borg Warner - Velvet drive inverter assemblies, refer to reference 14001 with 26 splines.
Coupling bell for 6L and 6.2L engines from PCM, CRUSADER , INDMAR .
IRM80-type PCM reversor with a ratio of 1.1/1 and an electrical inversion control.
Installation planned for live output or some Walter brand V-DRIVE.
IRM80 PCM reversor with a ratio of 1.1/1 and a mechanical inversion control.
Planned mounting for PCM type V-DRIVE.
230°F oil temperature sensor for Velvet drive type inverter, Borg Warner.