Miscellaneous engine parts - Page 169

This system is perfect for fast boats with powerful engines without space available for installing a waterlock and/or gooseneck. By using one of these compact silencers, you significantly reduce exhaust noise with minimal back pressure. All parts are made of synthetic materials, corrosion-free and

light.

Transom fittings for this system are available in stainless steel (AISI 316) or reinforced black plastic.

The MV type waterlock and transom fitting are equipped with a non-return valve that prevents seawater from circulating into the engine.

Features

• For pipe diameters Ø 125 mm

• Supplied with AISI 316 stainless steel mounting brackets for silencers

• Temperature sensor for raw water alarm is optional (recommended)

This system is perfect for fast boats with powerful engines without space available for installing a waterlock and/or gooseneck. By using one of these compact silencers, you significantly reduce exhaust noise with minimal back pressure. All parts are made of synthetic materials, corrosion-free and

light.

Transom fittings for this system are available in stainless steel (AISI 316) or reinforced black plastic.

The MV type waterlock and transom fitting are equipped with a non-return valve that prevents seawater from circulating into the engine.

Features

• For pipe diameters Ø 150 mm

• Supplied with AISI 316 stainless steel mounting brackets for silencers

• Temperature sensor for raw water alarm is optional (recommended)

52mm round control box for Vetus generator set including its 6 meter power cable.

3 bezels supplied: black - chrome - white.

Low profile portholes - Type PA (AIII).

The ergonomic handles are easy to open and close and with the additional interior trim you can have

the same level of finish as our other products.

On the outside the anodized aluminum frame gives the

PA series a premium look and feel, with a slightly different finish compared to others

portholes.

The portholes are made with a frameless, smoked glass sash. The fasteners are invisible from the inside or outside, and the windows are held open by friction hinges.

The portholes are suitable for the AIII device location area.

Features :

External dimensions A x B (mm): 315 x 180.

Cut-out dimensions C x D (mm): 297 x 162.

Cutting radius R (mm): 57.

Replacement mosquito net: WSP00K.

Replacement white trim: WTP00W.

Low profile portholes - Type PA (AIII).

The ergonomic handles are easy to open and close and with the additional interior trim you can have

the same level of finish as our other products.

On the outside the anodized aluminum frame gives the

PA series a premium look and feel, with a slightly different finish compared to others

portholes.

The portholes are made with a frameless, smoked glass sash. The fasteners are invisible from the inside or outside, and the windows are held open by friction hinges.

The portholes are suitable for the AIII device location area.

Features :

External dimensions A x B (mm): 368 X 193.

Cut-out dimensions C x D (mm): 350 X 175.

Cutting radius R (mm): 57.

Replacement mosquito net: WSP01K.

Replacement white trim: WTP01W.

Low profile portholes - Type PA (AIII).

The ergonomic handles are easy to open and close and with the additional interior trim you can have

the same level of finish as our other products.

On the outside the anodized aluminum frame gives the

PA series a premium look and feel, with a slightly different finish compared to others

portholes.

The portholes are made with a frameless, smoked glass sash. The fasteners are invisible from the inside or outside, and the windows are held open by friction hinges.

The portholes are suitable for the AIII device location area.

Features :

External dimensions A x B (mm): 425 X 180.

Cut-out dimensions C x D (mm): 407 X 162.

Cutting radius R (mm): 57.

Replacement mosquito net: WSP02K.

Replacement white trim: WTP02W.

Low profile portholes - Type PA (AIII).

The ergonomic handles are easy to open and close and with the additional interior trim you can have

the same level of finish as our other products.

On the outside the anodized aluminum frame gives the

PA series a premium look and feel, with a slightly different finish compared to others

portholes.

The portholes are made with a frameless, smoked glass sash. The fasteners are invisible from the inside or outside, and the windows are held open by friction hinges.

The portholes are suitable for the AIII device location area.

Features :

External dimensions A x B (mm): 453 X 193.

Cut-out dimensions C x D (mm): 435 X 175.

Cutting radius R (mm): 57.

Replacement mosquito net: WSP03K.

Replacement white trim: WTP03W.

Low profile portholes - Type PA (AIII).

The ergonomic handles are easy to open and close and with the additional interior trim you can have

the same level of finish as our other products.

On the outside the anodized aluminum frame gives the

PA series a premium look and feel, with a slightly different finish compared to others

portholes.

The portholes are made with a frameless, smoked glass sash. The fasteners are invisible from the inside or outside, and the windows are held open by friction hinges.

The portholes are suitable for the AIII device location area.

Features :

External dimensions A x B (mm): 652 X 193.

Cut-out dimensions C x D (mm): 634 X 175.

Cutting radius R (mm): 57.

Replacement mosquito net: WSP04K.

Replacement white trim: WTP04W.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 360.

B = Cutout (mm): 340.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 158.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 590.

B = Cutting (mm): 5770.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 283.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 660.

B = Cutout (mm): 640.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 321.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 670.

B = Cut (mm): 650.

C (mm): 172.

D = Cutout (mm): 152.

E = Cutting radius (mm): R76.

Coverage area (cm²): 363.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 730.

B = Cutout (mm): 710.

C (mm): 172.

D = Cutout (mm): 152.

E = Cutting radius (mm): R76.

Coverage area (cm²): 400.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 750.

B = Cut (mm): 730.

C (mm): 198.

D = Cutout (mm): 178.

E = Cutting radius (mm): R89.

Coverage area (cm²): 503.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 890.

B = Cutout (mm): 870.

C (mm): 198.

D = Cutout (mm): 178.

E = Cutting radius (mm): R89.

Coverage area (cm²): 608.