Connecting rod

Set of bearings for a standard size connecting rod.

Set of bearings for a standard size connecting rod of a Mercruiser Diesel engine.

Vis de bielle vendus à l'unité 5/16-24 pour moteur base Ford 302.

Matériel à utiliser en combinaison de l'écrou CRN610.

Un visuel de votre montage en place vous sera toujours demandé pour définir le type d'épaulement dont vous disposez.

Standard dimension connecting rod bearings, width 31mm, for Volvo Penta 4 and 6 cylinder diesel engines with serial number before 2204141572.

Reference engraved on pads: 1542079.

For mounting with a width of 29mm, see reference: 11322.

Story 270111 vs 876511:

In the 90s Volvo removed this reference, recommending the use of reference 11322 (876511).

For almost 30 years the use of the 11322 reference was the standard for the reconditioning of diesel blocks without any technical problems following the hundreds of reconditionings during this period.

For 5 years Volvo has reintroduced this reference, offering again the possibility of obtaining this material without any viable technical reasons knowing that the use of the reference 11322 (876511) has become the standard during all these years.

However, we continue to offer reference 270111 in our range.

Vis de bielle vendus à l'unité 3/8-24 pour moteur base Ford 351.

Matériel à utiliser en combinaison de l'écrou CRN731.

Un visuel de votre montage en place vous sera toujours demandé pour définir le type d'épaulement dont vous disposez.

Vis de bielle vendus à l'unité 3/8-24 pour moteur base GM V6 - SB.

Matériel à utiliser en combinaison de l'écrou CRN731.

Un visuel de votre montage en place vous sera toujours demandé pour définir le type d'épaulement dont vous disposez.

Connecting rod screw and nut kit for the following Volvo Penta engines:

AD31, AD31B, AD31D-A, AD31L-A

AD31P-A, AD31XD, AD41A, AD41B

AD41D, AD41L-A, AD41P-A, AQAD30A

AQAD31A, AQAD40A, AQAD40B, AQAD41A

AQD40A, D41A, D41B, D41D

D41L-A, KAD300-A, KAD32P, KAD42A

KAD42B, KAD42P-A, KAD43P-A, KAD44P

KAD44P-B, KAD44P-C, KAMD300-A, KAMD42A

KAMD42B, KAMD42P-A, KAMD43P-A, KAMD44P-A

KAMD44P-C, MD30A, MD31A, MD40A

TAMD30A, TAMD31A, TAMD31B, TAMD31D

TAMD31L-A, TAMD31M-A, TAMD31P-A, TAMD31S-A

TAMD40A, TAMD40B, TAMD41A, TAMD41B

TAMD41D, TAMD41H-A, TAMD41H-B, TAMD41L-A

TAMD41M-A, TAMD41P-A, TAMD42B, TAMD42WJ-A

TD30A, TD31ACE, TD40A, TMD30A

TMD31A, TMD31B, TMD31D, TMD31L-A

TMD40A, TMD40B, TMD40C, TMD41A

TMD41B, TMD41D, TMD41L-A

Bearing set for a Yanmar engine connecting rod series:

1GM - 1GM10

2GM - 2GM20

3GM - 3GM30

Set of bearings for a connecting rod in dimension 0.20.

Set of bearings for a connecting rod in dimension 0.30.

Bearings for a STD connecting rod on a Volvo Penta 4 and 6 cylinder diesel engine.

Width: 29mm.

Story 270111 vs 876511:

In the 90s Volvo removed the reference 270111, recommending the use of the reference 11322 (876511).

For almost 30 years the use of the 11322 reference was the standard for the reconditioning of diesel blocks without any technical problems following the hundreds of reconditionings during this period.

For 5 years Volvo has reintroduced the reference 270111, offering again the possibility of obtaining this material without any viable technical reasons knowing that the use of the reference 11322 (876511) has become the standard during all these years.

Set of bearings for a connecting rod in dimension 0.20.

Set of bearings for a standard 57.14mm connecting rod.

Set of bearings for a standard size connecting rod with a diameter of 53.34mm and a width of 21.3mm.

Please note that for recent 4-cylinder 3-litre GM181 engines ONLY which have bearings with a width of 19mm, please refer to reference 23-804982.

5/16-24 connecting rod screw nut for GM or Ford base engine.

Set of bearings for a connecting rod in repair dimension 0.25mm, width 21.3mm.

Set of bearings for a connecting rod in dimension 0.30.

Set of bearings for a connecting rod in repair dimension 0.75mm, width 21.3mm.

set of bearings for a connecting rod in repair dimension 0.50mm.

Set of bearings for a connecting rod in dimension 0.10.

Set of bearings for a connecting rod in dimension 0.10.

Set of bearings for a connecting rod in repair dimension 0.50mm, width 21.3mm.

Set of bearings for a connecting rod in dimension 0.20 of width 27mm.

AQ60F, AQ90, AQ95, AQ95A, AQ110, AQ120

BB30, BB100

MB18

AQ105A, AQ115A, AQ115B

AQ130A, AQ130B, AQ130C, AQ130D

BB115A, BB115B, BB115C

MB20A, MB20B, MB20C

For block with 6 fixing screws for the crankshaft oil seal holder.