These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 10.

L x W x H (mm): 229 x 147 x 132.

2-piece lashing straps 3m x 25mm with VETUS logo.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 390.

Length (mm): 1400.

Width (mm): 400.

Height (mm): 800.

Color: Translucent light blue.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 70.

Dimensions (mm): 780*780.

Height (mm): 270.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 80.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

This high-quality synthetic tank for drinking water is supplied with an electric pump that automatically starts when the pressure in the system drops (for example, when a tap is opened).

Installing a DWS tank saves valuable time, as all that's required is connecting the pipes and power supply. This high-end drinking water system offers a high degree of ease of use.

An inspection cover for cleaning the inside of the tank is also fitted.

All fittings for the 38mm suction and 16mm vent diameter filler pipe are supplied pre-installed, along with a filter in the suction line and a float sensor for connecting a level gauge.

Features :

Tank volume (liter): 120.

Voltage: (v): 24.

Filling diameter (mm): 38.

Event Diameter (mm): 16.

Drain diameter (mm): 13.

Pump flow rate (l/min): 13.2

Pressure (Bar): 3.10.

Length (mm): 1050.

Depth (mm): 450.

Height (mm): 400.

The PFWS system is meticulously designed to ensure a clean and stable water supply every time your boat is out.

Equipped with an adjustable pressure switch, the PFWS allows you to customize the water pressure to suit your specific needs. Ensuring a constant water flow for any onboard activity requiring water. The self-priming pump eliminates the hassle of manually priming the pump, saving you time and effort.

Additionally, the check valve prevents backflow, ensuring the integrity of your water supply and preventing contamination. With a built-in pressure gauge, you can easily monitor water pressure in real time, providing valuable information to optimize system performance. The inlet water filter filters out all impurities, ensuring your water supply remains clean and pure.

Features :

Voltage (V): 24.

Capacity (liters): 19.

Weight (kg): 9.5.

Pipe connection diameter (mm): 19.

Max. pressure (bar): 4.2.

Max. suction height (m): 1.8.