This pressurized water system ensures a constant flow in the boat's freshwater circuit. It is comparable to a domestic tap water system. The tank and its pressurized membrane relieve the pump motor by saving it from having to start each time water is drawn. This system ensures a constant water flow, saving energy and minimizing noise.

They have an adjustable pressure switch, a pressure gauge (manometer) and a non-return valve.

The pressurized water units of HF type systems meet EMC requirements.

Features :

Width (mm): 200.

Height (mm): 324.

Length (mm): 404.

Voltage (V): 12.

Capacity (liters/min): 12.5.

Tank capacity (liters): 8.

Weight (kg): 8.2.

Pipe connection diameter (mm): 13.

Max. pressure (bar): 2.5.

Max. suction height (m): 3.

This hose is made of transparent PVC with a spiral inlay and is suitable for transport.

drinking water and grey water on board, suction or pressure

Inner Diam (mm): 38.

External Diam (mm): 47.

Weight (kg/m) 0.80.

Max pressure (bar): 4.

Curve (mm): 90.

Roll length (m): 30.

HCHD(S) collar suitable: HCHD(S)043 - HCHD(S)047.

Suitable HCS collars: HCS32 - HCS40.

To make opening and closing ILT120 lids easy and hassle-free.

A well-designed wrench to make moving stubborn lids easier.

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 9.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 7.

L x W x H (mm): 212 x 130 x 123.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 137.

Length (mm): 1200.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100 (?).

Dimensions (mm): 1170*1490.

Height (mm): 240.