Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 60 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 50 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 45 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 40 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 150 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 125 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 110 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 60° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 100 mm.

Also available in a straight, 60º or 90º bend type.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 150 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 125 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 100 mm.

In some configurations, the exhaust system may be located so close to the engine's exhaust manifold that the injected cooling water does not always mix with the hot exhaust gases. The result is often overheating of the exhaust pipe and/or the water cap.

Installing a water mixer directly behind the exhaust manifold will prevent this problem

This water-gas mixer is intended for exhaust pipes with an internal diameter of 90 mm

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 254 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 203 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 152 mm.

Also available in a straight, 60º or 90º bend type.

Plastic fittings for 90° angled exhaust hoses. Suitable for pipes with an internal diameter of Ø 127 mm.

Also available in a straight, 60º or 90º bend type.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 1.9.

Inner diameter (mm): 90.

Outer diameter (mm): 98.

Bend radius (mm): 135.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 1.3.

Inner diameter (mm): 65.

Outer diameter (mm): 73.

Radius of curvature (mm): 98.

Suitable for: Exhaust.

Max. pressure (bar): 3.3.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 1.4.

Inner diameter (mm): 76.

Outer diameter (mm): 84.

Radius of curvature (mm): 114.

Suitable for: Exhaust.

Max. pressure (bar): 3.3.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 1.1.

Inner diameter (mm): 57.

Outer diameter (mm): 65.

Radius of curvature (mm): 86.

Suitable for: Exhaust.

Max. pressure (bar): 3.3.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 1.

Inner diameter (mm): 51.

Outer diameter (mm): 59.

Radius of curvature (mm): 77.

Suitable for: Exhaust.

Max. pressure (bar): 4.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 0.88.

Inner diameter (mm): 45.

Outer diameter (mm): 53.

Radius of curvature (mm): 68.

Suitable for: Exhaust.

Max. pressure (bar): 4.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 0.79.

Inner diameter (mm): 40.

Outer diameter (mm): 48.

Radius of curvature (mm): 60.

Suitable for: Exhaust.

Max. pressure (bar): 4.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 10.8.

Inner diameter (mm): 305.

Outer diameter (mm): 323.

Radius of curvature (mm): 606.

Suitable for: Exhaust.

Max. pressure (bar): 2.

The most flexible wastewater hose available thanks to its smooth EPDM rubber material and the large number of turns.

The completely smooth inner surface of the pipe reduces back pressure in the engine.

Exhaust pipes with an inner diameter up to Ø 152 mm have a bend radius of 1.5 times the diameter. Exhaust pipes with an inner diameter greater than Ø 152 mm have a bend radius of twice the diameter. Resistant to temperatures between -30º + 100ºC with brief temperatures of 115ºC.

The SLANG type is approved by Lloyds Register and meets the requirements of SAE J2006 R2.

Features :

Weight (kg): 0.55.

Inner diameter (mm): 30.

Outer diameter (mm): 38.

Bend radius (mm): 45.

Suitable for: Exhaust.

Max. pressure (bar): 4.