Deck hatches - Type MAGNUS (AI)

MAGNUS hatches have a satin anodized profile frame with 10mm thick "dark smoke" colored acrylic and are designed for offshore use, Design Category A, Zone I.

These hatches can be opened from the inside or outside and can remain open at any angle up to 180º with almost no obstruction in the opening.

They have a ventilation position and can be locked completely tightly.

The application on habitable multihulls as a means of evacuation in an inverted position is subject to European legislation.

Warning :

VETUS strongly advises against installing a MAGNUS AI panel below deck level in areas where (temporary) immersion may occur. When installing a panel below deck, always pay special attention to the base area, as hull flexing will compromise the watertightness of any panel.

Features :

Number of handles: 2.

Shape: Square.

Panel opening: Framed.

Friction hinges: Yes.

External dimensions A x B (in mm): 473 x 473.

Cut-out dimensions C x D (in mm): 421 x 421.

Ventilation hatch - Type MAGNUS (AI)

MAGNUS hatches have a satin anodized profile frame with 10mm thick "dark smoke" colored acrylic and are designed for offshore use, Design Category A, Zone I.

These hatches can be opened from the inside or outside and can remain open at any angle up to 180º with almost no obstruction in the opening.

They have a ventilation position and can be locked completely tightly.

The application on habitable multihulls as a means of evacuation in an inverted position is subject to European legislation.

Warning :

VETUS strongly advises against installing a MAGNUS AI panel below deck level in areas where (temporary) immersion may occur. When installing a panel below deck, always pay special attention to the base area, as hull flexing will compromise the watertightness of any panel.

Features :

Number of handles: 1.

Shape: Square.

Panel opening: Framed.

Friction hinges: Yes.

External dimensions A x B (in mm): 312 x 3120

Cut-out dimensions C x D (in mm): 260 x 260.

Ventilation hatch - Type MAGNUS (AI)

MAGNUS hatches have a satin anodized profile frame with 10mm thick "dark smoke" colored acrylic and are designed for offshore use, Design Category A, Zone I.

These hatches can be opened from the inside or outside and can remain open at any angle up to 180º with almost no obstruction in the opening.

They have a ventilation position and can be locked completely tightly.

The application on habitable multihulls as a means of evacuation in an inverted position is subject to European legislation.

Warning :

VETUS strongly advises against installing a MAGNUS AI panel below deck level in areas where (temporary) immersion may occur. When installing a panel below deck, always pay special attention to the base area, as hull flexing will compromise the watertightness of any panel.

Features :

Number of handles: 2.

Shape: Square.

Panel opening: Framed.

Friction hinges: Yes.

External dimensions A x B (in mm): 399 x 254.

Cut-out dimensions C x D (in mm): 347 x 202.

Escape hatch - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 2.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 521 x 521.

Cut-out dimensions C x D (in mm): 471 x 471.

Escape hatch - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 2.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 474 x 474.

Cut-out dimensions C x D (in mm): 424 x 424.

Deck hatches - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 2.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 424 x 424.

Cut-out dimensions C x D (in mm): 374 x 374.

Ventilation hatch - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 1.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 390 x 260.

Cut-out dimensions C x D (in mm): 340 x 210.

Deck hatches - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 2.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 474 x 344.

Cut-out dimensions C x D (in mm): 424 x 294.

Ventilation hatch - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 1.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 350 x 280.

Cut-out dimensions C x D (in mm): 300 x 230.

Ventilation hatch - Type PLANUS (AII)

These hatches feature a satin anodized aluminum frame with a 75mm corner radius and a 10mm dark smoke acrylic cover.

A friction hinge allows the hatches to stay open at

any angle up to 180º.

The PLANUS type is suitable for design category A, zone II.

Features :

Number of handles: 1.

Shape: Square.

Panel opening: Frameless.

Friction hinges: Yes.

External dimensions A x B (in mm): 280 x 280.

Cut-out dimensions C x D (in mm): 230 x 230.

Set of 2 LH + RH hatch handles for all hatches.

Deck hatch - The FGHF series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGHF, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGHF series is distinguished by its fully flush bolts and handles. Designed larger, they are equipped with a grip in the handle so that they can be opened from the outside using a winch handle.

The FGHF (AII Device Location Area) series is available in four sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 700 x 700.

Cut-out dimensions C x D (in mm): 627 x 627.

Number of handles: 4.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Deck hatch - The FGHF series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGHF, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGHF series is distinguished by its fully flush bolts and handles. Designed larger, they are equipped with a grip in the handle so that they can be opened from the outside using a winch handle.

The FGHF (AII Device Location Area) series is available in four sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 580 x 580.

Cut-out dimensions C x D (in mm): 507 x 507.

Number of handles: 4.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Deck hatch - The FGHF series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGHF, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGHF series is distinguished by its fully flush bolts and handles. Designed larger, they are equipped with a grip in the handle so that they can be opened from the outside using a winch handle.

The FGHF (AII Device Location Area) series is available in four sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 515 x 515.

Cut-out dimensions C x D (in mm): 442 x 442.

Number of handles: 3.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Deck hatch - The FGHF series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGHF, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGHF series is distinguished by its fully flush bolts and handles. Designed larger, they are equipped with a grip in the handle so that they can be opened from the outside using a winch handle.

The FGHF (AII Device Location Area) series is available in four sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 330 x 330.

Cut-out dimensions C x D (in mm): 260 x 260.

Number of handles: 1.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Escape hatch - The FGH series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGH, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGH (AII Device Location Area) series is available in six sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 700 x 700.

Cut-out dimensions C x D (in mm): 627 x 627.

Number of handles: 4.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Escape hatch - The FGH series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGH, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGH (AII Device Location Area) series is available in six sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 580 x 580.

Cut-out dimensions C x D (in mm): 507 x 507.

Number of handles: 4.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Escape hatch - The FGH series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGH, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGH (AII Device Location Area) series is available in six sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 577 x 462.

Cut-out dimensions C x D (in mm): 507 x 392.

Number of handles: 2.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Escape hatch - The FGH series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGH, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGH (AII Device Location Area) series is available in six sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 527 x 397.

Cut-out dimensions C x D (in mm): 457 x 327.

Number of handles: 2.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Deck hatch - The FGH series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGH, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGH (AII Device Location Area) series is available in six sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 515 x 515.

Cut-out dimensions C x D (in mm): 442 x 442.

Number of handles: 3.

Mosquito net type: HCM4444.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Deck hatch - The FGH series is specially designed for new boats.

Suitable for new builds as it is necessary to provide a hatch in the deck. After installing the FGH, the hatch is completely recessed into the deck, creating a smooth, flush appearance.

The FGH (AII Device Location Area) series is available in six sizes.

Made from 12mm thick 'dark smoke' acrylic with a maintenance-free polished and anodised aluminium frame.

Features :

External dimensions A x B (in mm): 330 x 330.

Cut-out dimensions C x D (in mm): 260 x 260.

Number of handles: 1.

Mosquito net type: HCM2626.

Material: Aluminum.

Shape: Flush.

Panel opening: Frameless.

Interior finishing frames with mosquito net.

Perfect finish and protection against insects.

The full range of panels can be supplied with a depth-adjustable trim with mosquito netting.

These white synthetic trims are designed to cover the space between the hatch and the inside face of the boat.

The frame depth can be cut to size to fit any wall thickness up to 50mm.

The integrated, hinged mosquito net can be easily removed for easy cleaning.

Fits hatches: ALTR520SL.

Wall thickness H (in mm): 44 - 72.

Interior finishing frames with mosquito net.

Perfect finish and protection against insects.

The full range of panels can be supplied with a depth-adjustable trim with mosquito netting.

These white synthetic trims are designed to cover the space between the hatch and the inside face of the boat.

The frame depth can be cut to size to fit any wall thickness up to 50mm.

The integrated, hinged mosquito net can be easily removed for easy cleaning.

Fits hatches: ALTR420SL.

Wall thickness H (in mm): 44 - 72.

Interior finishing frames with mosquito net.

Perfect finish and protection against insects.

The full range of panels can be supplied with a depth-adjustable trim with mosquito netting.

These white synthetic trims are designed to cover the space between the hatch and the inside face of the boat.

The frame depth can be cut to size to fit any wall thickness up to 50mm.

The integrated, hinged mosquito net can be easily removed for easy cleaning.

Fits hatches: ALTD520SL.

Wall thickness H (in mm): 44 - 72.

Interior finishing frames with mosquito net.

Perfect finish and protection against insects.

The full range of panels can be supplied with a depth-adjustable trim with mosquito netting.

These white synthetic trims are designed to cover the space between the hatch and the inside face of the boat.

The frame depth can be cut to size to fit any wall thickness up to 50mm.

The integrated, hinged mosquito net can be easily removed for easy cleaning.

Fits hatches: ALTD420SL.

Wall thickness H (in mm): 44 - 72.