Stainless steel straight shackle for 12mm chain.

Anchor swivel shackles improve anchor retrieval. Using a swivel and connecting shackle for your anchor and mast will greatly improve anchor retrieval and help ensure the mast sits perfectly in your anchor locker.

Stainless steel straight shackle for 10mm chain.

Anchor swivel shackles improve anchor retrieval. Using a swivel and connecting shackle for your anchor and mast will greatly improve anchor retrieval and help ensure the mast sits perfectly in your anchor locker.

Stainless steel straight shackle for 8mm chain.

Anchor swivel shackles improve anchor retrieval. Using a swivel and connecting shackle for your anchor and mast will greatly improve anchor retrieval and help ensure the mast sits perfectly in your anchor locker.

Stainless steel straight shackle for 6mm chain.

Anchor swivel shackles improve anchor retrieval. Using a swivel and connecting shackle for your anchor and mast will greatly improve anchor retrieval and help ensure the mast sits perfectly in your anchor locker.

Stainless steel swivel for 10 to 13 mm chain.

Anchor swivel shackles improve anchor retrieval. Using a swivel and connecting shackle for your anchor and mast will greatly improve anchor retrieval and help ensure the mast sits perfectly in your anchor locker.

Lever ratchet chain stop for 10mm chain specially designed for RC12 series windlasses.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 10mm chain specially designed for RC10 series windlasses.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 8mm chain specially designed for RC8 AND RC10 series windlasses.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 10 - 13 mm chain.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 13mm chain.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 10mm chain.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 8mm chain.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Lever ratchet chain stop for 10mm to 13mm chain, for RC10 or RC12 windlass series.

Windlasses are not designed to withstand the high loads that can be transmitted by the chain when at anchor. The chain must be secured with a chain stopper or the cable must be secured to a cleat, bollard, or other load-bearing point.

Height matched to the chain level of the RC series windlasses, meaning no packer or base is required. The body and pin are made of 316 stainless steel and the pawl is made of high-strength 2205 stainless steel.

The ratchet is shaped to fit the chain, preventing damage to the galvanizing caused by traditional ratchets. It has a high-quality, mirror-polished finish.

Lever ratchet chain stop for 8mm to 10mm chain, for RC8 windlass series.

Windlasses are not designed to withstand the high loads that can be transmitted by the chain when at anchor. The chain must be secured with a chain stopper or the cable must be secured to a cleat, bollard, or other load-bearing point.

Height matched to the chain level of the RC series windlasses, meaning no packer or base is required. The body and pin are made of 316 stainless steel and the pawl is made of high-strength 2205 stainless steel.

The ratchet is shaped to fit the chain, preventing damage to the galvanizing caused by traditional ratchets. It has a high-quality, mirror-polished finish.

Compact and economical chain stop for 8 to 10 mm chains. This stainless steel model prevents damage to the windlass drive mechanism.

Chain stoppers hold the chain and relieve the load on the windlass. Always use a chain stopper to secure and raise the anchor, to release the anchor, or to prevent the anchor from accidentally falling free while underway.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 275.

Ø B (in mm): 250.

Ø C (in mm): 300.

Consumption (in V): 24.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 326.

Ø B (in mm): 300.

Ø C (in mm): 350.

Consumption (in V): 12.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 275.

Ø B (in mm): 250.

Ø C (in mm): 300.

Consumption (in V): 24.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 275.

Ø B (in mm): 250.

Ø C (in mm): 300.

Consumption (in V): 12.