This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 88.

Length (mm): 800.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

This high-quality synthetic tank for drinking water is supplied with an electric pump that automatically starts when the pressure in the system drops (for example, when a tap is opened).

Installing a DWS tank saves valuable time, as all that's required is connecting the pipes and power supply. This high-end drinking water system offers a high degree of ease of use.

An inspection cover for cleaning the inside of the tank is also fitted.

All fittings for the 38mm suction and 16mm vent diameter filler pipe are supplied pre-installed, along with a filter in the suction line and a float sensor for connecting a level gauge.

Features :

Tank volume (liter): 42.

Voltage: (v): 24.

Filling diameter (mm): 38.

Event Diameter (mm): 16.

Drain diameter (mm): 13.

Pump flow rate (l/min): 13.2

Pressure (Bar): 3.10.

Length (mm): 610.

Depth (mm): 350.

Height (mm): 400.

This hose is made of transparent PVC with a spiral inlay and is suitable for transport.

drinking water and grey water on board, suction or pressure

Inner Diam (mm): 30.

External Diam (mm): 38.

Weight (kg/m) 0.60.

Max pressure (bar): 4.5.

Curve (mm): 70.

Roll length (m): 30.

Suitable HCHD(S) collar: HCHD(S)037.

Suitable HCS collars: HCS25 - HCS32.

Electric heater with adjustable thermostat (40 - 80 ° C). External male thread, ISO 228/1 G1¼. The length of the screw-in element is 300 mm.

WHEL type heating elements meet low voltage requirements.

Features :

Volt (V): 230.

Watt (W): 1000.

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 31.

Coolant capacity (liter): 3.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 61.

Length (mm): 660.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.

This high-quality synthetic tank for drinking water is supplied with an electric pump that automatically starts when the pressure in the system drops (for example, when a tap is opened).

Installing a DWS tank saves valuable time, as all that's required is connecting the pipes and power supply. This high-end drinking water system offers a high degree of ease of use.

An inspection cover for cleaning the inside of the tank is also fitted.

All fittings for the 38mm suction and 16mm vent diameter filler pipe are supplied pre-installed, along with a filter in the suction line and a float sensor for connecting a level gauge.

Features :

Tank volume (liter): 42.

Voltage: (v): 12.

Filling diameter (mm): 38.

Event Diameter (mm): 16.

Drain diameter (mm): 13.

Pump flow rate (l/min): 13.2

Pressure (Bar): 3.10.

Length (mm): 610.

Depth (mm): 350.

Height (mm): 400.