This high-quality synthetic tank for drinking water is supplied with an electric pump that automatically starts when the pressure in the system drops (for example, when a tap is opened).

Installing a DWS tank saves valuable time, as all that's required is connecting the pipes and power supply. This high-end drinking water system offers a high degree of ease of use.

An inspection cover for cleaning the inside of the tank is also fitted.

All fittings for the 38mm suction and 16mm vent diameter filler pipe are supplied pre-installed, along with a filter in the suction line and a float sensor for connecting a level gauge.

Features :

Tank volume (liter): 120.

Voltage: (v): 24.

Filling diameter (mm): 38.

Event Diameter (mm): 16.

Drain diameter (mm): 13.

Pump flow rate (l/min): 13.2

Pressure (Bar): 3.10.

Length (mm): 1050.

Depth (mm): 450.

Height (mm): 400.

The PFWS system is meticulously designed to ensure a clean and stable water supply every time your boat is out.

Equipped with an adjustable pressure switch, the PFWS allows you to customize the water pressure to suit your specific needs. Ensuring a constant water flow for any onboard activity requiring water. The self-priming pump eliminates the hassle of manually priming the pump, saving you time and effort.

Additionally, the check valve prevents backflow, ensuring the integrity of your water supply and preventing contamination. With a built-in pressure gauge, you can easily monitor water pressure in real time, providing valuable information to optimize system performance. The inlet water filter filters out all impurities, ensuring your water supply remains clean and pure.

Features :

Voltage (V): 24.

Capacity (liters): 19.

Weight (kg): 9.5.

Pipe connection diameter (mm): 19.

Max. pressure (bar): 4.2.

Max. suction height (m): 1.8.

This hose is made of transparent PVC with a spiral inlay and is suitable for transport.

drinking water and grey water on board, suction or pressure

Inner Diam (mm): 50.

External Diam (mm): 60.

Weight (kg/m) 1.20.

Max pressure (bar): 3.

Curve (mm): 125.

Roll length (m): 10.

Suitable HCHD(S) collar: HCHD(S)0359.

Suitable HCS collars: HCS50.

WTKIT type connection kit for drinking water tank with inspection hatch and connectors.

Supplied with:

- An inspection hatch (WTIKIT)

- A right angle connector (RT38B) for the Ø 38 mm filling pipe

- A right angle connector (RT16B) for the Ø 16 mm water pump

- A right angle connector (RT16B) for ventilation Ø 16 mm

- Two fixing straps

- A T-piece to connect two Ø 16 mm tanks

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 4.

L x W x H (mm): 212 x 130 x 123.

Made of high-quality polyethylene, this large-capacity tank can handle all the liquids you need to store on your boat. It features an inspection hatch and can accommodate the ILT concept. For easy opening, there's a flange in the cap. At the bottom, there's a 38mm connection that can be drilled for interconnection or drainage.

Thanks to the large inspection hole (140 mm), the tank complies with ISO 2148. Depending on the type of use you have for this tank, a suitable connection kit is available. The tank is easy to install and has enough capacity for long cruises.

Features :

Width (mm): 390.

Capacity (liters): 100.

Length (mm): 1010.

Height (mm): 315.