FORD V8 460 CONVENTIONAL SPARK PLUG WIRE KIT
Complete spark plug wire set including coil wire for OMC FORD 7.5 litre 460 engine.

Complete spark plug wire set including coil wire for OMC FORD 7.5 litre 460 engine.
Complete spark plug wire set for GM496 8.1 litre V8 engine with 8 coils.
80PSI oil pressure sensor with 1/8-27 thread
Adaptation harness for Medallion table.
Thermal circuit breakers, single-pole 80 Amperes for surface mounting.
The visible reset button allows you to see whether the circuit breaker is engaged or not.
These circuit breakers are generally used in auxiliary and accessory circuits.
Amplifier circuit breakers comply with SAE J1117 and J1625 standards for ignition protection.
• Agency Approvals: UL Approved 32V DC
• Interruption rating: 300 A at 30 V
• Ignition protection: SAE J1625 and J1171
• Material(s): Thermoset plastic UL Rating 94VO
• Temperature range: -32C to 92C
Démarreur à réduction 10 dents pour moteur Ford 5L et 5.8L en rotation standard CCW disposant d'un ordre d'allumage 1-8-4-5-6-2-7-3.
12 Volt 30 Amp 5 terminal relay for OMC , Johnson Evinrude, Volvo Penta applications...
12v 30amp small pin relay for multiple applications, namely:
Volvo Penta
Indmar
Ilmor
Electronic distributor for GM HEI V8 engines with 5 and 5.7 liter displacement.
Materials included in kit 550002.
Ignition rotor for GM base V6 engine with HEI ignition.
Distributor head for Ford injection engine.
3/8-18NPT diameter temperature probe.
Diameter 17mm
Temperature sensor present on the head of the diesel filter for Volvo Penta D4 and D6 engines.
Universal engine harness for GM carbureted base engines with conventional or Prestolite electronic ignition.
Beam that can be adapted to a multitude of applications.
Motor output connection 8 square male pins.
For a complete hardware assembly to be used in combination with the references:
- 6117-25
- 6107-03
9-tooth reduction starter designed for attachment to the engine block along the oil pan using 2 aligned straight screws.
Fixing:
- Short screw PG600
- Long screw PG601R
Screws not included.
Starter replacing the older generation without DR9597 type reduction.
Mounting for flywheel with a diameter of 32.4 cm.
Starter for the following Yamaha engines:
300HP F - LF 2007 - 2009
350HP after 2007
425HP after 2007
Starter for the following Suzuki - BRP engines:
70 - 90hp from 2009 to 2016
80hp from 2009 to 2017
150 - 175hp from 2006 to 2017
200hp from 2005 to 2017
225 - 250hp from 2004 to 2017
300hp from 2007 to 2017
14 tooth starter for the following Mercury outboard motors:
- DFI - OPTIMAX: 115 to 200HP 2.5L SN OT178500 and after - 200 to 250HP 3L SN OT467442 and after
- VERADO: 135 to 350HP after 2005 with a solenoid on the starter.
Solenoid only: SW463
4 terminal relay isolated by the base for OMC motor.
4-terminal base-isolated relay for the following Mercury engines:
- 15 to 60HP 2-stroke 2 and 3 cylinders
- Mercruiser inboard