VOLVO FUSE CIRCUIT BREAKER - 966689

Inboard motor adapter to convert a 10-pin harness to a 14-pin Deutsch type.
10 pin male to 14 pin female connection (Deutsch).
For reverse connection see reference 84-866337T01.
Kit to manage SC100 System Link instruments from a 10-pin connection at the bar.
Contains a 10-pin to 3-pin adapter and a 3-pin to 3-pin low voltage reset module.
The engine must be able to provide a Tach Link output, and a gray analog tachometer wire must be connected to a 10-pin connection at the helm to enable the use of this kit.
Electrical harness for the following alternators:
- ARC20826
- ARC20827
- ARC20828
Rev counter sensor for Mercruiser Diesel 1.7 DTI engines.
MAP sensor for Indmar Ford Raptor 6.2L 575 engines with a supercharger.
Alarm probe present on the lower thermostat housing of Crusader engines not fitted with VDO instrumentation.
Pre-catalyzed air probe for Indmar and Mercruiser type engines.
Probe with 6 pins (3 + 3) and a wide plastic connector.
Oxygen sensor for the following Honda engines:
- Honda 40-50HP before 1997
- Honda 200-250hp after 2006
Water temperature sensor providing both information for the dial and an alarm.
Dimensions: M18 X 1.5.
Following Volvo Penta applications:
2001
2001B
2001AG
2001BG
2002
2002B
2002D
2002AG
2002BG
2003
2003B
2003D
2003AG
2003BG
2003T
2003TB
2003 SOLAS
2003B SOLAS
2003TB SOLAS
2003TR
AQAD30A
MD30A
TAMD30A
TMD30A
MD40A
AQD40A
TAMD40A
TAMD40B
AQAD40A
AQAD40B
TMD40A
TMD40B
TMD40C
Temperature sensor for Volvo 22 series and Perkins engines.
Water temperature alarm sensor on Volvo Penta engines of series 31 -32 -41 - 42 -43.
Yanmar 100°C temperature probe.
Universal resistor 1.5 ohms.
Complete Mallory electronic distributor for Ford 5.8 litre V8 engine in standard rotation with carburettor.
Electronic distributor with a flat distributor head for 4.3 litre V6 multipoint injection engines, MPI - GXI types.