Waterlock with a capacity of 7 liters in high density polyethylene with fixed inlets and outlets with multiple diameters, namely:

- 40.5mm

- 45.5mm

- 50.5mm

Dimensions: 48x14x26cm

Once your boat's engine has been stopped, with the correct volume capacity selected, the VETUS waterlock will ensure that water does not return to the engine. All VETUS water pots are equipped with a drain plug for winter storage.

Suitable for exhaust pipes with an inner diameter of Ø 60 mm.

Capacity: 10.5L

A: 530 x 138 mm

B: 290mm

D: 60mm

Exhaust system, long VETUS waterlock with built-in check valve for added safety.

• Suitable for exhaust pipes with an inner diameter of Ø 90 mm

• Rotating inlet and outlet tips

• Comes with 2 fixing straps

• Optional temperature sensor

Capacity: 17L

A: 578 x 170 mm

B: 368mm

D: 90mm

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 45mm exhaust system.

Features :

Capacity (liters): 4.5.

Length (mm): 385.

Width (mm): 165.

Height (mm): 254.

Airlock position: Vertical.

% Noise Reduction: 35.

Waterlock designed for modern high performance boats with one or two large engines that have limited space in the engine room.

The outlet connection at the top can be rotated 360º and the inlet connection is at a 45º upward angle. The MG type can only be installed in water-injected exhaust systems. Its body is made entirely of synthetic materials, therefore insensitive to corrosion or galvanic action.

To optimize noise reduction, flexible supports for MG and HPW watercoks can be used.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 130.

Water inlet pipe connection diameter (mm): 203.

Outlet pipe connection diameter (mm): 203.

Length (mm): 890.

Width (mm): 500.

Height (mm): 750.

Airlock position: Vertical.

% Noise Reduction: 25.

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 4.5L

A: 385mm

B: 254mm

C: 165mm

D: 45mm

Comes with 2 fixing straps.

The quietest Vetus waterlock in the world!

Thanks to its unique three-chamber technology, it provides an incredible 10dB more noise reduction than traditional waterlocks. Its rotating chambers and hose connections ensure quick and easy installation, even in the tightest spaces.

Comes with 2 fixing straps

Capacity: 5L

A: 772mm

B: 520mm

C: 110mm

D: 50mm