Fonctionnalité

NMEA 2000 Oui

BLAST Oui

ECOmo Oui

Commande à distance Y

Moteur

Nombre de soupapes SOHC 4 cylindres

Cylindrée (cc) 1496

Alésage x course (mm) 73 x 89.4

Régime maxi (RPM) 5 000-6 000

Puissance nette du moteur (kW (PS)) 58.8 (80)

Refroidissement Refroidissement par eau (avec thermostat)

Alimentation d'essence Electronique (PGM-FI)

Allumage PGM-IG (allumage électronique programmé)

Démarreur Démarreur électrique

Echappement Moyeu de l'hélice

Rapport d''embase 2.33

Hélice rotation Standard

Réglage d'assiette Electrique

Fonction

Démarrage électrique Oui

Sortie de l''alternateur (AMP.) 44A

Capacité de chargement de la batterie (AMP.) 35A

Commande à distance Oui

Dimensions

Hauteur du tableau (mm) 537

Poids à vide (kg) 165

Longueur (mm) 746

Largeur (mm) 449

Hauteur (mm) 1 566

Remanufactured engine block in reverse rotation RH before 1990 for GM V8 5.7 liter base with 12 fixing screws for the intake manifold.

Features :

- 2-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Rocker cover external fixing

- Kit of 2 sprockets for the distribution (without chain)

- Reverse rotation: ignition 1-2-7-5-6-3-4-8

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader 350 - 327, Chriscraft, RIVA engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block in standard rotation LH before 1990 for GM V8 5 liter base with 12 fixing screws for the intake manifold.

Features :

- 2-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Rocker cover external fixing

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader, Mercruiser, Volvo, OMC engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Reconditioned GM496 8.1 litre HO type engine block.

Engine base including all casings, timing belt, oil.

Perfect product for replacing your Mercruiser, Volvo Penta engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block for FORD 5.8 liter GT40 base

Features :

- GT40 cylinder heads - 300HP

- Drilling for mechanical fuel pump

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Engine including high quality internal parts to meet marine requirements.

Reconditioned GM496 8.1 litre non-HO engine block.

This type of block is not in stock unlike HO bases, please contact us directly for any information.

Perfect product for replacing your Mercruiser, Volvo Penta engine

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block in standard rotation for GM V8 7.4 liter L29 base.

Features :

- One-piece rear crankshaft oil seal

- GM454 generation VI engine base

- Oval intake passages

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Roller pushers

- 6 fixing screws for the timing case

- L29 type cylinder heads (closed passages on the intake)

- 4 bolts per crankshaft bearing

Engine including:

- Rocker cover (G6 type aluminum)

- Sheet metal oil pan

- Timing case

- Front damper

- Intake and exhaust gaskets

Perfect product for replacing your Mercruiser, Volvo, Crusader engine

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Engine including high quality internal parts to meet marine requirements.

Engine including high quality internal parts to meet marine requirements.

Remanufactured engine block after 1990 for GM V8 7.4 liter base

Features :

- One-piece rear crankshaft oil seal

- GM454 generation VI engine base

- Oval intake passages

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Roller pushers

- 4 bolts per crankshaft bearing

- 6 fixing screws for the timing case.

- Cylinder heads with a central bore in the middle of the intake (NOT L29)

We usually replace MARK V engine bases with flat tappets with MARK VI with roller tappets.

Perfect product for replacing your Mercruiser, Volvo, Crusader engine.

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block in standard rotation LH before 1990 for GM base 7.4 liter V8

Features :

- 2-piece rear crankshaft oil seal

- GM454 generation IV engine base

- Oval intake passages

- Distribution kit with a chain

- Firing order: 1-8-4-3-6-5-7-2

- Drilling for the fuel pump axle

Engine including:

- Rocker cover (G6 type aluminum)

- Sheet metal oil pan

- Timing case

- Front damper

- Intake and exhaust gaskets

Perfect product for replacing your Crusader, Chriscraft, RIVA engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Engine including high quality internal parts to meet marine requirements.

Reconditioned engine block for FORD 5.8 liter base.

Features :

- Flat pushers

- Firing order: 1-3-7-2-6-5-4-8

- One-piece rear crankshaft oil seal

- Block Windsor casting # D4 - D9

- Drilling for mechanical fuel pump

Perfect product for replacing your OMC , VOLVO, PCM engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block for FORD 5.8 liter base in reverse rotation

Features :

- Flat pushers

- Firing order: 1-8-4-5-6-2-7-3

- One-piece rear crankshaft oil seal

- Block Windsor casting # D4 - D9

- Drilling for mechanical fuel pump

Perfect product for replacing your PCM, Indmar engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block in reverse rotation RH after 1990 for GM V8 5.7 liter base with 12 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Kit of 2 sprockets for the distribution (without chain)

- Reverse rotation: ignition 1-2-7-5-6-3-4-8

- Drilling for the fuel pump axle

Engine including:

- Rocker cover

- Oil pan

- Timing case

- Front damper

Perfect product for replacing your Crusader 350, Chriscraft, RIVA engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Engine including high quality internal parts to meet marine requirements.

Remanufactured engine block in standard rotation LH before 1990 for GM V8 5.7 liter base with 12 fixing screws for the intake manifold.

Features :

- 2-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Rocker cover external fixing

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader, Mercruiser, Volvo, OMC engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Bloc moteur reconditionné en rotation standard LH après 1990 pour base GM V8 5.7 litres disposant de 12 vis de fixation pour la pipe d'admission.

Caractéristiques :

- Joint spi arrière de vilebrequin en un morceau

- 12 vis de fixation pour la pipe d'admission

- Cache culbuteurs fixation centrale

- Rotation standard : allumage 1-8-4-3-6-5-7-2

- Perçage pour l'axe de la pompe à essence

Produit parfait pour le remplacement de votre moteur Crusader, Mercruiser , Volvo , OMC ...

Le reconditionnement moteur intègre la rectification, l'usinage, le remplacement et le contrôle de l'ensemble des éléments clefs afin de vous fournir un bloc moteur marin apte à remplacer votre ancienne mécanique.

Bloc moteur reconditionné de type Vortec pour base GM V8 5.7 litres disposant de 8 vis de fixation pour la pipe d'admission.

Caractéristiques :

- Joint spi arrière de vilebrequin en un morceau

- 8 vis de fixation pour la pipe d'admission

- Cache culbuteurs fixation centrale

- Rotation standard : allumage 1-8-4-3-6-5-7-2

- Sans perçage pour l'axe de la pompe à essence

- Culasses de types VORTEC

Produit parfait pour le remplacement de votre moteur Crusader, Mercruiser , Volvo , OMC ...

Le reconditionnement moteur intègre la rectification, l'usinage, le remplacement et le contrôle de l'ensemble des éléments clefs afin de vous fournir un bloc moteur marin apte à remplacer votre ancienne mécanique.

Reconditioned Vortec type engine block for GM V8 5 liter base with 8 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- No drilling for the fuel pump shaft

- VORTEC type cylinder heads

Perfect product for replacing your Crusader, Mercruiser, Volvo, OMC engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block in standard LH rotation after 1990 for GM 5 liter V8 base with 12 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader, Mercruiser, Volvo, OMC engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block in reverse rotation RH before 1990 for GM V8 5 liter base with 12 fixing screws for the intake manifold.

Features :

- 2-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Rocker cover external fixing

- Kit of 2 sprockets for the distribution (without chain)

- Reverse rotation: ignition 1-2-7-5-6-3-4-8

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader 305 -283, Chriscraft, RIVA engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Reconditioned engine block for FORD 5 litre base.

Features :

- Flat pushers

- Firing order: 1-3-7-2-6-5-4-8

- One-piece rear crankshaft oil seal

Perfect product for replacing your OMC , VOLVO, PCM engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Reconditioned engine block for GM V6 4.3 liter base after 1990 Vortec type with 8 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- Plastic timing case with 6 screws

- Roller camshaft

- Balance shaft

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

Perfect product for replacing your 4.3GL, 4.3EFI engine...

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Remanufactured engine block for GM V6 4.3 liter base after 1990 with 12 mounting screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- Sheet metal distribution housing with 10 screws

- Roller camshaft

- Without balance shafts

- 12 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Mounting provided for electric fuel pump type P4594 or others.

Engine including:

- The timing case

- The oil pan

- Rocker covers

- Front damper

- Manifold and intake gasket

Perfect product for replacing your 4.3LX, AQ205 or OMC carburetor engine.

Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.

Engine including high quality internal parts to meet marine requirements.

New engine block for GM502 V8 8.2 liter base from 1991 to 2005 generation VI.

Features :

- One-piece rear crankshaft oil seal

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- No drilling hole for the fuel pump shaft

- Cylinder heads with rectangular intakes

Perfect product for replacing your Mercruiser, Volvo, Crusader engine...

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

New standard rotation LH engine block for GM V8 7.4 liter L29 generation VI base

Features :

- One-piece rear crankshaft oil seal

- Oval cylinder heads of type L29

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- No drilling for fuel pump axle

- Roller pushers

Perfect product for replacing your Mercruiser, Volvo Penta, Crusader engine

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

New engine block for GM V8 6.2 liter MPI base.

Features :

- One-piece rear crankshaft oil seal

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- VORTEC type cylinder heads

Perfect product for replacing your MERCRUISER 6.2L MPI engine

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

- Flywheel

- Mixing pump