Engine mounts for marine engines

Engine mount for Yanmar with the following features:

- Length: 205mm

- Width: 60mm

- Total height: 147mm

- Body height: 75mm

- Threaded rod: M16 X 1.5

- Center distance: 173mm

- Note on rubber 150

- Maximum load 100 kg

- Shore 60

Kit including 4 engine mounts for Yanmar single cylinder Y series.

Dimensions:

- Height: 35 and 65mm

- Diameter: 58mm

- Center distance: 95mm

- Axle: 12mm

Bague caoutchouc pour vérin de trim Mercruiser.

Complete fixing kit including washers, nut and threaded rod for SP17 series engine mount.

Thread types M16-1.5 X M16-1.5, length 110mm.

Kit to be used in combination with SP171609 series engine mounts with a diameter of M16-1.5 on the lower side (shim) and M16-1.5 on the upper side (top engine).

Existing material in M20-1.5 higher and not M16-1.5 under reference SP181609-20.

Axle kit not suitable for type 22323 supports (fine pitch).

Single motor mount with a 25.5mm diameter axle.

22.2mm mounts being discontinued.

Engine mount for Yanmar with the following features:

- Length: 205mm

- Width: 60mm

- Total height: 147mm

- Body height: 75mm

- Threaded rod: M16 X 1.5

- Center distance: 173mm

- Note on rubber 200

- Maximum load 150 kg

- Shore 70

Engine mount for universal application but especially Volvo Penta with the following characteristics:

Center distance: 140mm

Width: 75mm

Total height: 50mm

Hardness: 55

Thread: M16

Support to be used in addition to the SP181609 fixing kit.

Engine mount for Yanmar with the following features:

- Length: 205mm

- Width: 60mm

- Total height: 147mm

- Body height: 75mm

- Threaded rod: M16 X 1.5

- Center distance: 173mm

- Note on rubber: 75

- Maximum load: 40 kg

- Shore 40

Pour un ensemble complet utiliser les références suivants :

1 pcs : SKR60950

2 pcs : N806

1 pcs : W900-1

2 pcs : W901

2 pcs : BR2795

Engine mount for universal application but especially Volvo Penta with the following characteristics:

Center distance: 140mm

Width: 75mm

Total height: 50mm

Hardness: 45

Thread: M16

Support to be used in addition to the SP181609 fixing kit.

M12 x M12 adjusting rod with nut and washer assembly for SP136003 type bracket.

Engine mount for universal application but especially Volvo Penta with the following characteristics:

Center distance: 140mm

Width: 75mm

Total height: 50mm

Hardness: 65

Thread: M16

Support to be used in addition to the SP181609 fixing kit.

Complete fixing kit including washers, nut and threaded rod for SP171609 series engine mount

Thread types M16-1.5 X M20-1.5, length 150mm.

Kit to be used in combination with SP171609 series engine mounts with a diameter of M16-1.5 on the lower side (shim) and M20-1.5 on the upper side (top engine).

Axle kit not suitable for type 22323 supports (fine pitch).

Engine mount for Volvo Penta.

Blue marking - SHORE 50 - 60KG

Volvo App:

2001, 2001AG, 2001B, 2001BG

2002, 2002AG, 2002B, 2002BG, 2002D

2003, 2003AG, 2003B, 2003BG, 2003D

MD5A, MD5B, MD5C

MD2010A, MD2010B, MD2010C, MD2010D

MD2020A, MD2020B, MD2020C, MD2020D

MD2030A, MD2030B, MD2030C, MD2030D

MD2040A, MD2040B, MD2040C, MD2040D

Motor support center distance 76mm height 34mm to be used in addition to the SP8001 axle.

Load: 70 kg

Motor support center distance 76mm height 34mm to be used in addition to the SP8001 axle.

Load: 105 KG

Rear engine mount for Yanmar 1GM - 1GM10 series.

Engine mount for universal application with the following features:

Center distance: 120mm

Width: 60mm

Total height: 40mm

Hardness: 55

Thread: M12

Support to be used in addition to the SP8001 fixing kit.

Support for Volvo Penta shore 60 engines with a blue marking:

D4-150A-G, D4-175I-G, D4-230A-G, D4-230I-G

D4-270A-G, D4-270I-G, D4-300A-G, D4-300I-G

D4-320A-G, D4-320I-G, D6-280A-A, D6-280A-B

D6-280A-C, D6-280A-D, D6-280A-E, D6-280I-A

D6-280I-B, D6-280I-C, D6-280I-D, D6-280I-E

D6-280I-E, D6-300A-F, D6-300A-G, D6-300D-F

D6-300D-G, D6-300I-F, D6-300I-G, D6-310A-A

D6-310A-B, D6-310A-C, D6-310A-D, D6-310A-E

D6-310D-B, D6-310D-C, D6-310D-D, D6-310D-E

D6-310I-A, D6-310I-A, D6-310I-B, D6-310I-C

D6-310I-C, D6-310I-D, D6-310I-E, D6-330A-B

D6-330A-C, D6-330A-D, D6-330A-E, D6-330A-F

D6-330D-C, D6-330D-D, D6-330D-E, D6-330D-F

D6-330I-B, D6-330I-C, D6-330I-D, D6-330I-E

D6-330I-F, D6-340A-G, D6-340D-G, D6-340I-G

D6-350A-A, D6-350A-B, D6-370A-C, D6-370A-D

D6-370A-E, D6-370A-F, D6-370D-B, D6-370D-C

D6-370D-D, D6-370D-E, D6-370D-F, D6-370I-A

D6-370I-B, D6-370I-C, D6-370I-D, D6-370I-E

D6-370I-F, D6-380A-G, D6-380D-G, D6-380I-G

D6-400A-E, D6-400A-F, D6-400A-G, D6-435D-C

D6-435D-D, D6-435D-E, D6-435D-F, D6-435I-A

D6-435I-A, D6-435I-C, D6-435I-D, D6-435I-E

D6-435I-F, D6-440A-G, D6-440D-G, D6-440I-G

D6-440I-WJ-G, D6-480D-G, D6-480I-G, D6-480I-WJ-G

Engine mount with the following characteristics:

Center distance 100mm with

16mm threaded rod.

Support height 47mm

height of threaded rod included 70mm.

For a 19mm threaded rod see reference 66284A2.

Engine mount with a 16mm diameter axle.

M16 nut and washers not included.

Engine mount for Yanmar with the following features:

- Length: 205mm

- Width: 60mm

- Total height: 147mm

- Body height: 75mm

- Threaded rod: M16 X 1.5

- Center distance: 173mm

- Note on rubber: 300

Support moteur arrière pour moteurs yanmar série 2GM et 2YM15 disposant d'une embase saildrive SD20 - SD25.

Remarque sur le caoutchouc /gravé : 150

Charge maximale : 150kg