BLOCS MOTEURS NEUFS

New VORTEC type engine block for GM V8 5 liter base with 8 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- VORTEC type cylinder heads

Perfect product for replacing your Mercruiser, Volvo, OMC , Crusader engine...

Engine block including the following positions:

- Timing case

- Rocker covers

- Oil pan

- Front damper

New engine block for GM502 V8 8.2 liter base from 1991 to 2005 generation VI.

Features :

- One-piece rear crankshaft oil seal

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- No drilling hole for the fuel pump shaft

- Cylinder heads with rectangular intakes

Perfect product for replacing your Mercruiser, Volvo, Crusader engine...

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

New standard rotation LH engine block for GM V8 7.4 liter L29 generation VI base

Features :

- One-piece rear crankshaft oil seal

- Oval cylinder heads of type L29

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- No drilling for fuel pump axle

- Roller pushers

Perfect product for replacing your Mercruiser, Volvo Penta, Crusader engine

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

New engine block for GM V8 6.2 liter MPI base.

Features :

- One-piece rear crankshaft oil seal

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- VORTEC type cylinder heads

Perfect product for replacing your MERCRUISER 6.2L MPI engine

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

- Flywheel

- Mixing pump

Brand new RH reverse rotation engine block for GM V8 5.7 litre base after 1990 with 12 intake manifold mounting screws.

Features :

- One-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Flat pushers

- Reverse rotation: ignition 1-2-7-5-6-3-4-8

- Drill hole for fuel pump shaft

Perfect product for replacing your Mercruiser, Volvo, OMC , Crusader engine...

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

New VORTEC type engine block in reverse rotation RH for GM V8 5.7 liter base after 1990 with 8 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 8 fixing screws for the intake pipe

- Central mounting rocker cover

- Reverse rotation: ignition 1-2-7-5-6-3-4-8

- No drilling hole for the fuel pump shaft

- VORTEC type cylinder heads

- Roller pushers

Perfect product for replacing your Mercruiser, Volvo, OMC , Crusader engine...

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

New VORTEC type engine block for GM V8 5.7 litre base after 1990 with 8 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- No drilling hole for the fuel pump shaft

- VORTEC type cylinder heads

- Roller pushers

Perfect product for replacing your Mercruiser, Volvo, OMC , Crusader engine...

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

Brand new RH reverse rotation engine block for GM V8 5.7 litre base before 1990 with 12 intake manifold mounting screws.

Features :

- Two-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Rocker cover external fixing

- Standard rotation: ignition 1-2-7-5-6-3-4-8

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader, Mercruiser, Volvo, OMC engine...

Engine block including the following positions:

- Timing case

- Rocker covers

- Oil pan

- Front damper

Material on special order, please contact us for lead times.

New engine block in standard rotation LH for GM V8 5.7 liter base before 1990 with 12 fixing screws for the intake manifold.

Features :

- Two-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Rocker cover external fixing

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Drilling for the fuel pump axle

Perfect product for replacing your Crusader, Mercruiser, Volvo, OMC engine...

Engine block including the following positions:

- Timing case

- Rocker covers

- Oil pan

- Front damper

New engine block in standard rotation LH for GM V8 5.7 liter base after 1990 with 12 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- 12 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Drill hole for fuel pump shaft

- Flat pushers

Perfect product for replacing your Mercruiser, Volvo, OMC , Crusader engine...

Engine block including the following positions:

- Timing case

- Oil pan

- Rocker cover

- Front damper

Engines before 2008 with a plastic timing cover (casting #090) being removed from production, the replacement is now made by a V6 vortec engine with a reworked aluminum timing cover to recover the signal from the CPS sensor and therefore the correct information for injection without heavy modification of the engine harness for example.

Features :

- One-piece rear crankshaft oil seal

- Replacement of assemblies with plastic timing covers.

- Roller camshaft

- Balance shaft

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Rocker arm with a bearing

- Cylinder head bearing casting #113

- Aluminum oil pan

Perfect product for replacing your pre-2008 engine of types 4.3GXI, 4.3MPI, but also carburetors.

Engine including all of the following positions:

- Rocker cover

- Oil pan

- Timing case

- Front damper

If replacing an engine with a plastic timing case, remember to order the appropriate circulation pump, reference W898N.

New engine block for GM V6 4.3 liter base after 2008 Vortec type with 8 fixing screws for the intake manifold.

Features :

- One-piece rear crankshaft oil seal

- ALUMINUM timing cover

- Roller camshaft

- Balance shaft

- 8 fixing screws for the intake pipe

- Centrally mounted rocker cover

- Rocker arm with a bearing

- Cylinder head bearing casting #113

- Aluminum oil pan

- Engine casting #234

Perfect product for replacing your engine after 2008 types 4.3GXI , 4.3MPI ...

Engine including all of the following positions:

- Rocker cover

- Oil pan

- Timing case

- Front damper

Connecting rod engine block with cylinder heads for Mercruiser 4.2L engine base.

Engine base including front damper and accessory pulley.