List of products by brand DAM MARINE

KIT FLAP SX PLUS 36KG

Smart Tabs are fully automatic and do not require any user adjustments while browsing.

Nitrogen-powered pneumatic cylinders provide constant thrust at the rear of the boat by keeping the trim plate down during acceleration. Thrust is determined instantly based on the boat's speed.

The new SX are made of composite, resistant to rust and corrosion.

Smart Tabs SX deliver unparalleled performance and durability and require no maintenance. For greater control and performance at high speeds, the flaps feature ribs on the underside.

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Centering diameter: 50mm male

Number of holes: 4 x 10.5mm

Center distance: 78mm

Outer diameter: 100mm

Yanmar 1.2.3GM - KM2P inverter assembly

Molded polyurethane disc absorbs shock, vibration, noise, shaft thrust, and temporary misalignment. Electrically insulates the shaft. No wear or maintenance. Supplied with complete hardware.

Assignment: Yanmar

Number of CVs on the shaft line for 100 rpm: 3

For Diam. Crust: 101.6mm.

Centering: 50mm.

Outer diameter: 114.3 mm

Center distance: 78.00 mm

Thickness: 32.5 mm

Material: Polyurethane

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Centering diameter: 65mm male

Number of holes: 4 x 10.5mm

Center distance: 100mm

Outer diameter: 120mm

Yanmar inverter assembly

Output shaft kit for TECHNODRIVE TMC60 inverter.

Kit including:

- Crab.

- Nut.

- Oil seal.

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Centering diameter: 63.5mm male

Number of holes: 4 x 10.5mm

Center distance: 82mm

Outer diameter: 101mm

Lombardini - Technodrive - ZF - Vetus inverter assembly

COUPLING CAKE 25MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 25mm

Exterior: 110mm

Centering diameter: 63.5 female

Number of holes: 4 x 11mm

Center distance: 82mm

Shaft length: 88mm

Borg Warner - Hurth inverter assembly

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Exterior: 100-110mm

Centering diameter: 60.1 female

Number of holes: 4 x 11mm

Center distance: 80mm

Shaft length: 86-96mm

Volvo Penta MS1 - MS2 - MS10 - MS25 inverter assembly

COUPLING CAKE 22MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 22mm

Exterior: 100mm

Centering diameter: 50 female

Number of holes: 4 x 10.5mm

Center distance: 78mm

Shaft length: 88-96mm

Yanmar 1GM - 2GM - 3GM - YS8 - YS12 - KM2P inverter assembly

COUPLING CAKE 25MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 25mm

Exterior: 101mm

Centering diameter: 63.5 female

Number of holes: 4 x 10.5mm

Center distance: 82mm

Shaft length: 82-98mm

Lombardini Technodrive Vetus ZF inverter assembly

COUPLING CAKE 35MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 35mm

Exterior: 127mm

Centering diameter: 63.5 female

Number of holes: 4 x 11.5mm

Center distance: 108mm

Shaft length: 98mm

Borg Warner Hurth Inverter Assembly - Volvo MS4 - MS4

COUPLING CAKE 25MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 25mm

Exterior: 100mm

Centering diameter: 50 female

Number of holes: 4 x 10.5mm

Center distance: 78mm

Shaft length: 88-96mm

Yanmar 1GM 2GM 3GM YS8 YS12 KM2P inverter assembly

TOURTEAU ACCOUPLEMENT 25MM

Tourteau d'accouplement à pince en acier, avec vis pointeau et clavetage. 4 trous.

Diamètre d'arbre : 25mm

Extérieur : 102mm

Diamètre centrage : 50 femelle

Nombres de trou : 4 x10.5mm

Entraxe : 78mm

The Sureseal seal is a propeller tree joint with automatic alignment, without drops.First builds on many brands and types of ships.It is installed on propeller trees ranging from 1' to 8'' and 25 mm to 160 mm.

For bi-engineers, we recommend the Sureseal model with 2 connections.In this way, if you drag or have a breakdown on an engine, the Sureseal is always lubricated.

If you install a replacement joint at the same time as the Sureseal, you can, at the time, change the lip joint without disconnecting the tree or pulling the boat out of the water.

The sealing joint consists of a blower to be mounted on the stambot tube and fixed by two collars.An inner bearing allows the sealing on the shaft.This bearing is lubricated by a water injection system and lubrication grooves in the borehole.The sealing on the propeller shaft is carried out by a lip seal.

Press for Princess boat.

Tree Diameter: 60mm

Tube diameter: 89mm

Mounting on Princess V58 for example.

Complete set of rings for 8 pistons of GM502 8.2 litre engine in repair dimension 0.30.

Metric dimension segments with the following dimensions: 1.5 x 1.5 x 3MM

Mounting normally provided on Mahle brand piston present on the latest generation of Mercuiser engines with aluminum cylinder heads.

Sticker for RIVA rocker cover for Crusader 454-502 320HP engine.

Protective cover for reverse gear selector on Volvo Penta outdrive type:

- DP-A

- DP-G