Shaft seals for marine propeller shafts and transmissions

30MM CABLE GLAND FOR 49MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

Overall length 110mm.

25MM CABLE GLAND FOR 39MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

25MM LUBRICATED CABLE GLAND FOR 43MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

45MM CABLE GLAND FOR 65MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

30MM LUBRICATED CABLE GLAND FOR 49MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

50MM CABLE GLAND FOR 70MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

40MM CABLE GLAND FOR 60MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

35MM LUBRICATED GLAND FOR 55MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

35MM CABLE GLAND FOR 55MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

40MM LUBRICATED CABLE GLAND FOR 60MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

45MM LUBRICATED CABLE GLAND FOR 65MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

The VETUS flexible cable gland used in this system has double lip seals to double the safety and guarantee watertightness.

Shaft diameter: 35 mm

Stern tube diameter: 56 mm

Width: 112 mm

Length: 145 mm

Repair kit for Vetus ZBW45A cable gland diameter 45mm.

Kit including:

- 3-screw flange for oil seal holder

- Oil seal x2

- Clamping screw

- Silicone grease

- O-ring

Repair kit for Vetus ZBW40A cable gland diameter 40mm.

Kit including:

- 3-screw flange for oil seal holder

- Oil seal x2

- Clamping screw

- Silicone grease

- O-ring

The VETUS flexible cable gland used in this system has double lip seals to double the safety and guarantee watertightness.

Shaft diameter: 45

Stern tube diameter: 71 mm

Width: 129 mm

Length: 165 mm

22MM CABLE GLAND FOR 39MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

The VETUS flexible cable gland used in this system has double lip seals to double the safety and guarantee watertightness.

Shaft diameter: 40 mm

Stern tube diameter: 61 mm

Width: 114 mm

Length: 150 mm

The VETUS flexible cable gland used in this system has double lip seals to double the safety and guarantee watertightness.

Shaft diameter: 30 mm

Stern tube diameter: 49.5 mm

Width: 112 mm

Length: 144 mm

Repair kit for Vetus ZBW35A cable gland diameter 35mm.

Kit including:

- 3-screw flange for oil seal holder

- Oil seal x2

- Clamping screw

- Silicone grease

- O-ring

25MM CABLE GLAND FOR 43MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

Also available for 39mm stern tube reference PE025-39.

Repair kit for Vetus ZBW30A cable gland diameter 30mm.

Kit including:

- 3-screw flange for oil seal holder

- Oil seal x2

- Clamping screw

- Silicone grease

- O-ring

1-1/4" 31.74MM CABLE GLAND FOR 43.25MM Sternpost

Cable glands made of special rubber to resist oils, temperature differences and friction.

Supplied complete and ready to install with protective tab, stainless steel clamps, tube of silicone grease and assembly instructions.

Other dimensions in inches on request.

Le joint Sureseal est un joint d'arbre d'arbre d'hélice à alignement automatique, sans gouttes. Première monte sur de nombreuses marques et types de navires. Il s'installe sur des arbres d'hélice allant de 1'' à 8'' et de 25 mm à 160 mm.

Pour les bi-moteurs, nous recommandons le modèle Sureseal avec 2 raccords. De cette façon, si vous faites de la traîne ou avez une panne sur un moteur, le Sureseal est toujours lubrifié.

Si vous installez un porte-joint de rechange en même temps que le Sureseal, vous pourrez, le moment venu, changer le joint à lèvre sans désaccoupler l'arbre ou sortir le bateau de l'eau.

Le joint d'étanchéité est composé d'un soufflet devant être monté sur le tube d'étambot et fixé par deux colliers. Un palier intérieur permet le lignage de l'étanchéité sur l'arbre. Ce palier est lubrifié grâce à un système d'injection d'eau et à des rainures de lubrification dans l'alésage. L'étanchéité sur l'arbre porte hélice est réalisée par un joint à lèvre.

Presse étoupe pour bateau de marque Princess.

Diamètre d'arbre : 60mm

Diamètre du tube : 89mm

Montage sur Princess V58 par exemple.