Coupling flanges for boat propeller shafts

Molded polyurethane disc absorbs shock, vibration, noise, shaft thrust, and temporary misalignment. Electrically insulates the shaft. No wear or maintenance. Supplied with complete hardware.

Assignment: Yanmar

Number of CVs on the shaft line for 100 rpm: 3

For Diam. Crust: 101.6mm.

Centering: 50mm.

Outer diameter: 114.3 mm

Center distance: 78.00 mm

Thickness: 32.5 mm

Material: Polyurethane

4" - 101.59mm diameter coupling hub for 1-1/4 - 31.74mm diameter propeller shaft.

Velvet Drive Series 71 - 72 Application.

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Centering diameter: 50mm male

Number of holes: 4 x 10.5mm

Center distance: 78mm

Outer diameter: 100mm

Yanmar 1.2.3GM - KM2P inverter assembly

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Centering diameter: 65mm male

Number of holes: 4 x 10.5mm

Center distance: 100mm

Outer diameter: 120mm

Yanmar inverter assembly

Output shaft kit for TECHNODRIVE TMC60 inverter.

Kit including:

- Crab.

- Nut.

- Oil seal.

Coupling plate on the reverse gear side of Yanmar KBW20 - KBW21 series.

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Centering diameter: 63.5mm male

Number of holes: 4 x 10.5mm

Center distance: 82mm

Outer diameter: 101mm

Lombardini - Technodrive - ZF - Vetus inverter assembly

Yanmar coupling pin diameter 100mm.

COUPLING CAKE 25MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 25mm

Exterior: 110mm

Centering diameter: 63.5 female

Number of holes: 4 x 11mm

Center distance: 82mm

Shaft length: 88mm

Borg Warner - Hurth inverter assembly

COUPLING CAKE 30MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 30mm

Exterior: 100-110mm

Centering diameter: 60.1 female

Number of holes: 4 x 11mm

Center distance: 80mm

Shaft length: 86-96mm

Volvo Penta MS1 - MS2 - MS10 - MS25 inverter assembly

COUPLING CAKE 22MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 22mm

Exterior: 100mm

Centering diameter: 50 female

Number of holes: 4 x 10.5mm

Center distance: 78mm

Shaft length: 88-96mm

Yanmar 1GM - 2GM - 3GM - YS8 - YS12 - KM2P inverter assembly

Coupling turret for Yanmar KM2P reverse gear with the following dimensions:

- outer flange: 100mm

- inverter diameter: 34mm

- total height: 38mm

- 20 grooves

- 4 screws

COUPLING CAKE 25MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 25mm

Exterior: 101mm

Centering diameter: 63.5 female

Number of holes: 4 x 10.5mm

Center distance: 82mm

Shaft length: 82-98mm

Lombardini Technodrive Vetus ZF inverter assembly

COUPLING CAKE 35MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 35mm

Exterior: 127mm

Centering diameter: 63.5 female

Number of holes: 4 x 11.5mm

Center distance: 108mm

Shaft length: 98mm

Borg Warner Hurth Inverter Assembly - Volvo MS4 - MS4

Coupling hub for 71c inverter.

COUPLING CAKE 25MM

Electro-cadmium-plated steel clamp coupling with grub screw and keyway. 4 holes.

Shaft diameter: 25mm

Exterior: 100mm

Centering diameter: 50 female

Number of holes: 4 x 10.5mm

Center distance: 78mm

Shaft length: 88-96mm

Yanmar 1GM 2GM 3GM YS8 YS12 KM2P inverter assembly

TOURTEAU ACCOUPLEMENT 25MM

Tourteau d'accouplement à pince en acier, avec vis pointeau et clavetage. 4 trous.

Diamètre d'arbre : 25mm

Extérieur : 102mm

Diamètre centrage : 50 femelle

Nombres de trou : 4 x10.5mm

Entraxe : 78mm