YANMAR OEM DIESEL FILTER

100 Hour Maintenance Kit for Mercury V6 3.4L and V8 4.6L Engines
Kit including:
- Oil filter
- High and low pressure fuel filter
- Oil pan gasket
- 2 base drain gaskets
300 Hour Service Kit for Mercury 80 - 100 - 115HP EFI 2.31L engines with serial number 2B094996 and later.
Kit including:
- Oil filter
- Fuel filter
- Oil pan gasket
- Base drain gasket
- Thermostat and gaskets
- 4 candles
- Seawater pump kit
- Base anode kit
Genuine OEM YANMAR Service Kit SK-MARINE-004-G including consumables for the following Yanmar engines:
Applications:
- 3HM - 3HMF
- 3HM35 - 3HM35F
Kit including the following positions:
- Oil filter 124085-35170
- Diesel filter 104500-55710
- Water pump gasket 124223-42110
- Cooling turbine 124223-42092
- O-ring 24341-000440
Anode kit for Volvo Penta type 290 or SP outdrives fitted with an SP propeller.
Kit including the following anodes:
- 00161A
- 00112A
Anode pad kit for Evinrude 20 - 25 and 30HP engines.
Applications:
- 20 hp from 1991 to 1998
- 25 and 30 hp from 1991 to 2005
- 35 hp from 1997 to 2001
Anode plate for Yamaha outboard motor from 8 to 250HP.
Round powerhead and base anode for the following Mercury outboard motors:
- EFI: 25 - 30HP
- 4-stroke carburetor: 5 / 6 / 8 / 9.9 / 10 / 15 / 20 / 25HP
- 2-stroke carburetor: 4 and 5 HP
Flat drift anode for Mercruiser and Mercury outdrives.
Included in kit: 10059A - 10060A - 10061A - 10165A - 10202A - 10203A.
Platinum anode fixed to the trim oil distributor of a Mercruiser Alpha One base.
Included in kit: 10059A - 10205A.
Kit permettant la conversion d'une anode monobloc impliquant le démontage de l'hélice en kit 2 pièces.
Anode au détails 10305-1.
Anode noix d'arbre aluminium pour arbre de diamètre 45mm.
Caractéristiques :
- A : 40mm
- B : 83mm
- C : 73mm
Anode aluminium de 0.4KG.
Caractéristiques :
- A : 144mm
- B : 60mm
- C : 185mm
- D : 28mm
Cooling impeller for Jabsco brand pump.
Width: 51 mm
Height: 22 mm
Shaft diameter: 8 mm
Width: 70 mm
Height: 22 mm
Shaft diameter: 16 mm
Cooling impeller for Volvo Penta D9 - D11 series engines:
D9A2A D9-425, D9A2B D9-425
D9A2A D9-500 (R4), D9A2B D9-500 (R5)
D9A2A D9-575
D9A2A D9A-MH, D9A2B MH
D9A2A D9-AMG
D11A-A, D11A-B, D11A-C, D11A-D, D11A-E
D11B1-A MP, D11B2-A MP (IPS)
Reassembly O-ring included.
Turbine height 75mm - diameter 65mm. 13 grooves
Cooling turbine diameter 57mm height 50mm.
Crankshaft end pump mounting with a cover and 6 screws.
Applications:
- AQ200D AQ205A
- AQ225D
- AQ255B
- AQ260A AQ260B
- AQ271 ABCD
- AQ280A AQ290A
- AQ311A and B
- 431A
- 570A 571A 572A
- 740A and B
8-blade cooling turbine for Renault Couach engine.
Dimensions:
- 8 blades
- Axle diameter: 17mm
- External diameter: 66mm
- Height: 32mm
Assembly for Renault Couach RD80D pump with double turbine.
Trapezoidal belt with a width of 13mm and a length of 1325mm.
Trapezoidal belt with a width of 13mm and a length of 1175mm.
Trapezoidal belt with a width of 13mm and a length of 1125mm.
Trapezoidal belt with a width of 9.5mm and a length of 1350mm.
Trapezoidal belt with a width of 9.5mm and a length of 737mm.
Trapezoidal belt with a width of 9.5mm and a length of 1000mm.