PCM ZR 4" COMPLETE EXHAUST ELEVATOR KIT

Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.
Durite disposant d'une surface lisse pour un meilleur serrage des colliers.
Vendu au mètre linéaire.
Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Universal exhaust flap with a diameter of 100mm.
Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.
Dimension Ø 52 mm, total diameter 62 mm.
Mounting depth 40 mm.
Suitable for 24 Volt DC
Use the XHSM sensor in VETUS waterlocks with a pre-installed connection
Use the XHSH type sensor for mounting in the exhaust pipe
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Suitable for exhaust pipe with internal diameter of Ø 45 mm.
The gooseneck raises the exhaust line above the waterline and provides additional reduction of the
noise. The outlet fits directly onto all VETUS rubber exhaust outlets.
Features :
Water inlet pipe connection diameter (mm): 45.
Outlet pipe connection diameter (mm): 45.
Length (mm): 182.
Width (mm): 135.
Height (mm): 502.
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Anti-siphon device with pressure relief valve without ventilation line. Supplied with connector, hose clamps and 4 m of 8 x 14 mm hose.
Can be used as an exhaust system or toilet.
Can be connected to pipes with internal diameters of 13, 19, 25 and 32 mm.
A 13mm diameter pipe can be directly fitted to the elbow fittings.
Size :
Width (mm): 50.
Length (mm): 98.
Height (mm): 162.
Materials:
Elbow, seat, valve and edge outlet: synthetic material.
Spring: Stainless steel.
The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.
Features :
360º rotating pipe fittings for 50mm internal pipe diameters
50mm cooling water drain
Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.