YANMAR MONOBLOCK EXHAUST MANIFOLD GASKET
Exhaust manifold gasket connecting the cylinder head to the heat exchanger.
One-piece joint for the 4 passages with straight connection.

Exhaust manifold gasket connecting the cylinder head to the heat exchanger.
One-piece joint for the 4 passages with straight connection.
Anode gasket for Volvo Penta catalytic manifold hatch.
Starboard exhaust manifold for PCM engine types H5 - H6 with temperature sensor measuring the temperature of the liquid and not the material.
Assembly with a probe on the SIDE and not on the top of the collector.
Port exhaust manifold for PCM engine types H5 - H6 with temperature sensor measuring the temperature of the liquid and not the material.
Assembly with a probe on the SIDE and not on the top of the collector.
Port exhaust manifold for PCM engine types H5 - H6 with temperature sensor measuring the metal temperature on TOP of the manifold.
Exhaust elbow gasket for Perkins 4236.
Exhaust elbow for Perkins perama 100 engine of types:
M20
M25
M30
M35
Elbow joint included.
Exhaust hose diameter 51mm.
Water hose diameter 22mm
Center distance of fixing screws 50mm
Exhaust elbow for OMC engine based on Ford or GM with elbow at the end of the manifold.
Round exhaust elbow for OMC 4 cylinder 2.5L OR 3L engine.
Exhaust elbow for Mercruiser engine with an 80mm diameter outlet.
Mounting hardware included.
Exhaust elbow riser for Yanmar 4LHA and 6LPA engines.
Reassembly gasket included.
Stainless steel exhaust elbow for PERKINS 4108 engine with water tapping on the rear part of the elbow (near the joint surface) allowing the water pipe to be positioned to the side for engines not having the Bowman assembly.
TUE50 hose for exhaust outlet.
Mounting hardware included:
- elbow joint
- water pipe gasket
- water pipe and screws
Exhaust pre-elbow between horn and exhaust elbow for Volvo Penta and OMC FORD base engines.
Features :
- Elbow diameter: 102 mm
- Horn diameter: 90 mm
- Length: 30 cm
Cast iron exhaust pre-elbow allowing the junction between the elbow exhaust hose and the horn exhaust hose on a Mercruiser V6 engine.
105mm round elbow side connection and oval horn side connection.
For installation with AP1520 and AP1525 hoses on engines without risers.
Can be mounted on a V8 engine block.
Exhaust hose for VOLVO diesel engine with the following dimensions:
Diameter: 90mm
Diameter: 85mm
Height: 75mm
Upper exhaust hose for Volvo Penta - OMC Ford base engines.
Exhaust hose between exhaust elbow and base horn for Mercruiser diesel engine.
Exhaust hose for Volvo Penta elbow, length 130 mm and diameter 75 mm.
Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.
Hose with a smooth surface for better tightening of the clamps.
Sold by the linear meter.
Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Mercruiser exhaust manifold front plate.
Starboard exhaust manifold for Mercruiser V8 engine based on GM small block before 1980.
Mounting hardware included.
Engine types:
- 225
- 250
- 255
- 270
- 280
Stainless steel exhaust manifold for Yanmar 2GM 2GM20 series engine.
Optional assembly.
Remember to add the seal reference 124000-13201
Exhaust manifold gasket kit for 4.3 liter V6 engine.